Page 1 of 1

Were do i get rifled PVC

Unread postPosted: Thu Jul 10, 2008 6:33 pm
Author: dudeman508
OK i looked all over the interet and i found some rifled PVC but nothing under 2 in. I am making a sniper and i need a 4 ft .5 in. peice of rifled pvc, if anybody can help i would be realy greatfull.

Unread postPosted: Thu Jul 10, 2008 6:34 pm
Author: SpudFarm
you can't get it.
you have to make it

Unread postPosted: Thu Jul 10, 2008 6:46 pm
Author: pocket
spud farm is right i had this problem before all tho there is a website about some guy making a marble shooter and he used a pioneer way like how the first sabot guns were created

Unread postPosted: Thu Jul 10, 2008 6:47 pm
Author: pocket
sorry for the double post i found the website scroll down half way it says rifling the barrel
http://www.sentex.net/~mwandel/cannon/air_gun.html

Unread postPosted: Thu Jul 10, 2008 7:06 pm
Author: THUNDERLORD
There was a how-to on here, but I can't find it now.
At one time judgmentarms (member here) was making them.
You could PM him maybe.
I saw clear rifled stuff somewhere I'll try to find it and see if it's under 2".

Unread postPosted: Thu Jul 10, 2008 7:28 pm
Author: dudeman508
it tryed looking for posts with judgmentarms as the author and i looked in the membre list so i could pm him, and i cant find enything[/code]

Unread postPosted: Thu Jul 10, 2008 7:41 pm
Author: MrCrowley
IIRC, he's not taking orders for awhile.

Unread postPosted: Thu Jul 10, 2008 7:46 pm
Author: Sticky_Tape
I don't think that judgementarms maes rifled .5'' pvc but you should check I with him.

Unread postPosted: Thu Jul 10, 2008 7:56 pm
Author: starman
The guy over at Spudgun.com used to resell Joel's (Spudtech) barrels. I just checked over there though and he was out of stock. You might send him a quick message and see if that situation is permanent or temporary.