Page 1 of 1
new burst disc
Posted: Thu Apr 06, 2006 3:39 pm
by Rambo
Am I the first one who tought about this idea?What do you think?Will I blow my self?How about an auto hybrid?
Posted: Thu Apr 06, 2006 7:08 pm
by Atlantis
I'm pretty sure you're not the first to think of this. I've seen one with a similiar idea, different layout though. The problem with a spring is that if it's too weak the piston will break, if it's too strong the valve will close to quickly. The sharp 90 degree turn might not be safe.
P.S. One, there's no "burst" or "disk" about this. Two, this is basically a big pop-off valve.
Posted: Thu Apr 06, 2006 11:27 pm
by Rambo
The imbportant is that it is for hybrid.I'm planing a hybrid shot gun.
Posted: Thu Apr 06, 2006 11:31 pm
by saladtossser
no spring if hybrid, charge the top with the same pressure of air as the chamber
Posted: Thu Apr 06, 2006 11:32 pm
by Brian the brain
I made this a long time ago.
http://devinexecution.com/airpower2/det ... ode=search
comments are in dutch but it's the same principle.
A pop-off-valve-hybrid..
Posted: Thu Apr 06, 2006 11:38 pm
by Rambo
Atlantis wrote:The sharp 90 degree turn might not be safe.
I think that it is safer then a coaxial hybrid.About the shot gun- my plan is much different.It will use AA batteries.
Posted: Thu Apr 06, 2006 11:48 pm
by saladtossser
brian i need a translation on that picture
Posted: Thu Apr 06, 2006 11:50 pm
by Rambo
Me too.Why there are two holes on the back of the barrel?
Posted: Thu Apr 06, 2006 11:56 pm
by Brian the brain
The holes is where the pressure enters the barrel after it's released.
I'll work on a translation but not right now...I'ts 5 to 7 in the morning here...Time to go get some sleep