Page 1 of 1
Surplus regulators
Posted: Sun May 03, 2009 5:18 am
by jackssmirkingrevenge
Anyone interested in these? Stainless steel, pharmaceutical grade, would make a very professional fuel meter
Posted: Sun May 03, 2009 5:42 am
by inonickname
Hmm. How much each and where from?
Btw which hospital pumps 200+ psi into patients masks or gas tenets...
Posted: Sun May 03, 2009 6:53 am
by jackssmirkingrevenge
inonickname wrote:Hmm. How much each and where from?
I think $50 a piece is fair, plus postage from the EU
Btw which hospital pumps 200+ psi into patients masks or gas tenets...
I said pharmaceutical industry
these were lifted off manufacturing equipment.
Posted: Sun May 03, 2009 7:09 am
by inonickname
Not sure, $50 is alright for a good reg (I can get a mini for $40, but these should be heaps better) but postage to west Aussieland would be massive..
Posted: Sun May 03, 2009 7:19 am
by jackssmirkingrevenge
In Australian dollars plus postage it would go up to 100 total (I suggested $50 US which in AUD would be around 70)
Posted: Fri Jul 22, 2011 3:17 am
by jackssmirkingrevenge
These are still available 2 years on, I'll let them go to a good home for free as long postage from the EU is paid.
Posted: Fri Jul 22, 2011 4:17 am
by jazzman56
How much would the postage be to AUS????
Posted: Fri Jul 22, 2011 4:22 am
by al-xg
What is the input pressure on these regs ?
Posted: Fri Jul 22, 2011 5:51 am
by jackssmirkingrevenge
Postage would be about $30, as to input pressure I have to look up the models.
Posted: Fri Jul 22, 2011 7:06 am
by wyz2285
I think I can pay the postage
how much is it to portugal? how do you want to receive the money?
Posted: Fri Jul 22, 2011 7:11 am
by jhalek90
i have paypal, and will pay postage.
What doe sit cost to ship to USA:
traverse city
Michigan
49684
I can PM you my exact address if requested.
Posted: Fri Jul 22, 2011 7:19 am
by jackssmirkingrevenge
Ok, here's how I'm going to go about it:
Anyone interested put your name down in this thread, one reg per member. If there are more three members interested I will draw lots.
Flat rate of $35 postage each to US/EU/Australia by surface mail, I accept Paypal or International Money Order.
These are made in USA by
VICTOR (great guy
), to give an idea of scale the gauge face is just over 2.75 inches diameter.
Maximum inlet pressure 350 psi
Regulators include gauges, black cap has a 0-30psi gauge (also does vacuum up to -100kPa), yellow cap has a 0-200 psi gauge.
All Inlet/Outlet ports have 1/4" female threads
edit: some other regs surplus to requirements, the smaller one has 1/8" sockets and good to 4 bar/57 psi from a 150 psi input, the larger one I have no idea, but it has a 300 bar gauge so presumably it's meant to be attached directly a cylinder, and a nice little flowmeter.
Posted: Sat Jul 23, 2011 1:45 am
by Pneumaticology
I will keep in touch, but if anyone else asks don't hold back because of me.