Page 1 of 1

Need bigger spark!!

Posted: Thu Apr 20, 2006 11:52 am
by WOW!!
I got a question, what is the best was to get a bigger spark?? I cant use a taser, caporitors would work but i have had a few blow up :shock: ,There are going to be 2 sparkplugs or a chamber short with 5 sparks in it. What is the best way to do it :?: Thx


Josh

Posted: Thu Apr 20, 2006 12:16 pm
by nicholai
you can use a taser, you just need someone who can buy them to modify it so its not in a hand held enclosure. The hand held enclosure of the stun gun guts is what classifies it as a weapon, if the guts are taken out and put in a square box its no more illegal than the ignition system for a gas powered RC car :)

Posted: Thu Apr 20, 2006 7:33 pm
by Benny
or an ignition coil is good but they are bulky, camera flash is good too but you need the spark gap realy close and the contacts wear away pretty fast.

Posted: Fri Apr 21, 2006 12:09 am
by brumby
Why would you ned a bigger spark? The chamber of my spudgun is 29" long and 4" wide and it ignights perfectly with a BBQ ignighter. You just gotta get the fuel right.

Posted: Fri Apr 21, 2006 11:02 am
by WOW!!
I know that a BBQ would work, but I was seeing what else is out there to try, I all ways want to try some new.


Josh

Posted: Mon Sep 04, 2006 10:04 pm
by frankrede
Maybe a short spark strip? I dont know how to make a bigger spark.

Posted: Mon Sep 04, 2006 10:08 pm
by VEGEMITEMODDER
how about a flyback ignition system or you could use a Ignition coil and a flash unit???

Posted: Mon Sep 04, 2006 10:25 pm
by WOW!!
I "borrowed" a taser from my friends house and made it with 2 spark plugs. That was a while ago, I dont know if I still have the cannon.

Posted: Mon Sep 04, 2006 11:40 pm
by MrCrowley
i had a RC car i took apart and found this magnatized thing with wires i hooked that up to a switch then to a battery and some wires in the chamber and when i flicked the switch i get constant sparks non stop , and theyre quite powerful sparks as well.

Posted: Mon Sep 04, 2006 11:59 pm
by VEGEMITEMODDER
would you have a pic of it MrCrowley?

Posted: Tue Sep 05, 2006 12:32 am
by MrCrowley
ill try get one up tonight, i use my phone and it takes awhile to send the pic to my comp via infra red, i used the spark thing on a mini combustion that i took apart so ill post a pic of just the spark thingy.

Posted: Tue Sep 05, 2006 2:34 am
by VEGEMITEMODDER
Cool ,no worries