Page 1 of 1
Question for golfball barrels
Posted: Mon May 08, 2006 8:35 pm
by ProfessorAmadeus
i was wondering "do you have to sleeve sdr-21 pipe into sch80 pipe or can you sleeve it into regular sch40 pipe?"this is off topic and im a newb so how do you gain stars and become something higher than just a private
Posted: Mon May 08, 2006 8:38 pm
by saladtossser
must be sch80, it will be very loose in sch40 thus making it pointless to sleeve
Posted: Mon May 08, 2006 8:46 pm
by ProfessorAmadeus
cool thanks. in my area i cant find sch80 so do you have any other sugestions
Posted: Mon May 08, 2006 8:52 pm
by SpudStuff
Order it from Pimpmann22 he sells it sleved check the classified
Posted: Mon May 08, 2006 8:58 pm
by Atlantis
As for the rank thing, posts = rank.
Posted: Tue May 09, 2006 1:34 pm
by spudshot
and mindless posting = punishment.
but yeah, i'd go with pimpmann, he should be hooking me up with some 1" sdr-21 too when i get the money for it
Posted: Tue May 09, 2006 1:36 pm
by )DEMON(
ya,you better watch out or you will get shocked to death through your key bourd
Posted: Tue May 16, 2006 3:29 am
by potatoboy00
sleve 2 in sch 40 into 2 in sch40
Posted: Tue May 16, 2006 9:10 pm
by sgort87
No, because that method sucks. It is painful, unreliable, and usually not worth it at all. The fit is not good at all and you always get great performance from SDR.
Posted: Tue May 23, 2006 6:08 pm
by plumpthumb
Well I have have sleeved 2 inch schedule 40 into the same and have a great
fit. At 80 psi my sniper can put a golfball through a good 3/4 inch of plywood
without a whimper. It's easy to sleeve if you use worm clamps-they keep the tube almost perfectly round. The ball makes a perfect fit with just a bit of encouragement to go down the barrel.
Posted: Wed May 24, 2006 2:54 am
by Benny
)DEMON( wrote:ya,you better watch out or you will get shocked to death through your key bourd
Ha!