Posted: Sun Apr 25, 2010 8:49 pm
Ok, thanks I'll have to see if I have a local tru value
@Tech
What are the dimensions of the 2.5" O-Ring being used?
Need to update my CAD file for your launcher.
Page 2 of 2
Posted: Mon Apr 26, 2010 11:48 am
Posted: Mon Apr 26, 2010 12:14 pm
I am not sure at the moment. I'll find out later. I just took a cut piece of pipe to the store and found some that fit.dewey-1 wrote:@Tech
What are the dimensions of the 2.5" O-Ring being used?
Need to update my CAD file for your launcher.
I'll see if I can get a bin number on that ring.Posted: Mon Apr 26, 2010 12:22 pm
UNfortuantly I don't have a local true value so I'll have to find somewhere else
Posted: Mon Apr 26, 2010 1:34 pm
I found the ring package. The o rings in the 2.5 inch QDV are part number 2-330. They are 2-1/2 inches OD, 2-1/4 ID, with a CS of 3/16ths of an inch. They just fit inside the pipe with minimal compression.
Posted: Mon Apr 26, 2010 2:14 pm
That is the size I actually already used on the drawing!Technician1002 wrote:I found the ring package. The o rings in the 2.5 inch QDV are part number 2-330. They are 2-1/2 inches OD, 2-1/4 ID, with a CS of 3/16ths of an inch. The just fit inside the pipe with minimal compression.
Thanks for verifying that number for me.