Golfball barrel pipe.
Posted: Sun Aug 01, 2010 1:35 am
I have looked everywhere for some pipe for a golfball barrel. All the pipe i find is eather too big or too small. Where can i get some the right size?
Page 1 of 1
Posted: Sun Aug 01, 2010 7:50 am
One of our sponsors carries it http://www.launchpotatoes.com. Product page here.
Posted: Sun Aug 01, 2010 8:24 am
He lives in Australia, so postage would be a PITA.
Like I mentioned earlier, look in stores that carry parts for agricultural stuff, irrigation etc. Either that, or check a specialty plumbing place that sells PVC.
Like I mentioned earlier, look in stores that carry parts for agricultural stuff, irrigation etc. Either that, or check a specialty plumbing place that sells PVC.
Posted: Sun Aug 01, 2010 12:01 pm
Sch 10 nominal 1.5" pipe. It's made in either stainless or aluminum. Great stuff!
Posted: Sun Aug 01, 2010 1:02 pm
Most plumbing supply stores carry it, ask at your local hardware store if they know of any suppliers
Posted: Sun Aug 01, 2010 1:14 pm
you could sleeve some 2" sch 40 pvc inside of itself
Posted: Sun Aug 01, 2010 1:51 pm
If ya gotta have it.......shipping be dammed!inonickname wrote:He lives in Australia, so postage would be a PITA.
Like I mentioned earlier, look in stores that carry parts for agricultural stuff, irrigation etc. Either that, or check a specialty plumbing place that sells PVC.
Posted: Sun Aug 01, 2010 2:01 pm
I like to de-shell golfvalls so that they fir perfectly in 1.5" sch 40 PVC pipe
Posted: Sun Aug 01, 2010 2:50 pm
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Posted: Sun Aug 01, 2010 3:04 pm
One layer of electrical tape and some petrolium jelly and it fits even better
Posted: Sun Aug 01, 2010 3:09 pm
If you can't find SDR 21 then use SDR 26, that is what I use, and although it isn't as good a fit, it still works good.
Posted: Sun Aug 01, 2010 5:46 pm
most plumbing suppliers call it class 200 pipe as well, a good thing to know,i almost missed it at my suppliersGun Freak wrote:If you can't find SDR 21 then use SDR 26, that is what I use, and although it isn't as good a fit, it still works good.
Posted: Mon Aug 02, 2010 1:40 am
you can try this
Posted: Mon Aug 02, 2010 2:22 am
Did no one read the third post? He lives in Aussie, so no point recommending American pipe (although on occasion it has be known to be found in Aus/NZ). You need to look for 40mm PVC PN12 (or similar).
The inside diameter will vary depending on the pressure rating (PN12, PN15, PN18 etc) and the company who makes it.
Go to a store like Reece's, bring a golfball and try out the pipe.
The inside diameter will vary depending on the pressure rating (PN12, PN15, PN18 etc) and the company who makes it.
Go to a store like Reece's, bring a golfball and try out the pipe.