Page 1 of 1

Ideas for quick loading Tennis Ball launcher?

Posted: Sun Dec 25, 2011 9:39 pm
by frigaardj
Hi All.

I have been making pneumatic cannons for quite a while, mostly for shooting golf balls, stones and that sort of projectile. The cannons have been quite successful but the need to pump up etc. for only one shot has begun to annoy me.

What I really want to build at the moment is a tennis ball launcher, that is very quick to load, decently powerful, cheap to build/run and easy to use.

Having no experience in the combustion/hybrid area, what can you guys recommend me? I am interested in the best system to use (pure combustion v. hybrid), the best and cheapest fuel to use, the quickest loading systems and all the fuel ratio stuff that I don't know much about. Please tell me of any ideas you have and point me to any past builds of yours.

Looking forward to your :idea: ideas,

fj

Posted: Mon Dec 26, 2011 12:33 am
by jsefcik
if your going combustion, make sure you have a chamber fan

ratio that works well is 2-1

so more less what ever your chamber is make your barrel double that

fuel- carb cleaner!!!

Posted: Mon Dec 26, 2011 1:07 am
by frigaardj
I can get a pc fan easily so will do that. Should I put it in the centre of the chamber? And should I run it during combustion or only up until (and after for clearance)?

ratios... I presume that 2:1 is in terms of volume? Is it better to have a thicker pipe for the chamber? Lots of people seem to use a 4" pipe and a 2.5"(tennis ball) barrel.

Carb cleaner - Is it cheap? It seems everyone is using propane - thoughts on that?

Also I was wondering what the deal is in terms of knowing when your gas to air solution is at the right ratio. Do people use a measured injector, if so how does the system work? (couldn't find a related forum post).

Sorry to be asking so many questions, bit of a combustion noob.

Posted: Mon Dec 26, 2011 1:31 am
by jackssmirkingrevenge
cartridges.

http://www.spudfiles.com/forums/combust ... 10402.html

http://www.spudfiles.com/forums/cartrid ... 20150.html

they'd have to be pretty big for a tennis ball launcher though.

you can use the same pipe as the barrel, just make it big.

http://www.spudfiles.com/forums/clear-c ... 22067.html

unless of course you don't mind a bit of complexity:

Image

Posted: Mon Dec 26, 2011 1:38 am
by mobile chernobyl
frigaardj wrote:
Carb cleaner - Is it cheap? It seems everyone is using propane - thoughts on that?
Don't use carb cleaner. Just use propane and do a little reading on here to find a setup that makes sense to you.

Using carb cleaner, while having all the information available on spudfiles at your access would be like using a chisel and slate to send a message via pterodactyl when you could just send a text message...

Posted: Mon Dec 26, 2011 1:52 am
by jackssmirkingrevenge
mobile chernobyl wrote:like using a chisel and slate to send a message via pterodactyl when you could just send a text message...
I would totally buy a 3G pterodactyl!

Posted: Sat Dec 31, 2011 6:41 pm
by frigaardj
Sorry for the delayed reply, I've been out of the country.

Propane seems sensible to me, I might try and build a meter. Regulators seem so expensive though.

Also does anyone have a favoured breech loading mechanism? Or with tennis balls would you recommend a simple muzzle load?

Finally, I managed to get a free disposable camera today - generic brand but will it stil be alright? I am doing some reading about all the stepup transformers etc trying to establish what is best.