Page 2 of 3
Posted: Sun Jun 25, 2006 2:15 pm
by saladtossser
how about a manifold for a piston valve or a hybrid?
i think you can make a revolving magazine with out of those, like that thing on the tippman a5
Posted: Sun Jun 25, 2006 2:24 pm
by noname
You would probably be able to do that if you wanted to spend that much time on it. It's only 3.98 but you'd need some kind of thing to spin it.
Posted: Sun Jun 25, 2006 6:47 pm
by spudmonkey
im thinkin ill probably have to get one, especially at that price
Posted: Sun Jun 25, 2006 9:45 pm
by Atlantis
That would make this gun perfect!
http://www.spudfiles.com/forums/viewtopic.php?t=1029&
You could build a gun with 6 chambers, and have 6 shots before recharging.
This part is kind of funny too.
http://pvcfittings.com/graphics/manifold1.jpg
Posted: Sun Jun 25, 2006 9:54 pm
by djt
or get two and make six chambers AND six barrels!
Posted: Mon Jun 26, 2006 6:29 am
by Jakal444
You can probably use it with multiple valves and have a multi shot cannon.
Posted: Mon Jun 26, 2006 9:54 am
by noname
No you can't because it is just a 7 way fitting. There is no valve or anything to seal 5 of the barrels while 1 is shot or anything like that.
Posted: Mon Jun 26, 2006 7:55 pm
by Atlantis
He was saying.."WITH multiple valves."
Posted: Mon Jun 26, 2006 8:01 pm
by Velocity
I dont have any proof... but I am pretty sure that fitting is not pressure rated.
So anything hybrid is basically ruled out, as well as usages on pneumatic and combustion chambers (just to keep it safe)
If it is like sch. 40 (really doesnt matter whether it is dwv, as long as it is used on the barrel), it probably will go down in history as the sickest paintball spudgun accessory ever
well... maybe not
Posted: Mon Jun 26, 2006 8:45 pm
by aperro13
put 90's on each one and you can shoot shit in 360 degrees at once. HAHA
Posted: Tue Jun 27, 2006 8:09 am
by Jakal444
No name I was thinking something like the picture below.
I do think it is pressure rated.
Posted: Tue Jun 27, 2006 10:01 am
by noname
I didn't write that. And Atlantis, You could only have a multiple shot with that with muliple valves and barrels; all the barrels are connected
Posted: Tue Jun 27, 2006 12:41 pm
by Jakal444
This fitting would be used to fill 7 mini chambers, each with a check-valve and ball-valve on it. Why is it not possible?
Posted: Tue Jun 27, 2006 1:37 pm
by frogy
I would use it for 1 barrel and 7 chambers like Jakal said instead of 7 barrels and 1\ a few chambers...
You could make 7 Tee valves and then have 7 chambers that could be pneumatically controlled to shoot 1 paintball barrel that has a force loader, you could fill all the chambers simultaneously if they were connected and have almost full-auto firing if you could push thet blow guns fast enough
Posted: Tue Jun 27, 2006 9:45 pm
by noname
Oh, I see. With check valves on one side and a valve on the other side with fittings to a schrader or quick-disconnect on the 1.5" or 2" side. Sorry atlantis, I didn't understand you at first. I'm thinking along the lines of that being a barrel, not 6
chambers and a fill valve.
