SpudFiles

<div align="center">SIDE VENTED CANNON

Provided by Boogieman - <a href="http://www.advancedspuds.com/">http://w ... ds.com/</a>

It took me a while, but I finally got my pictures finished. As you notice the barrel is removed, as is the propane meter and propane tank.

<img src="http://www.spudfiles.com/official_pics/gun_chamber4.jpg">

<img src="http://www.spudfiles.com/official_pics/gun_chamber3.jpg">

<img src="http://www.spudfiles.com/official_pics/gun_chamber2.jpg">

<img src="http://www.spudfiles.com/official_pics/gun_chamber1.jpg">

<img src="http://www.spudfiles.com/official_pics/drawing.jpg">

<img src="http://www.spudfiles.com/official_pics/ ... r_main.jpg">

<img src="http://www.spudfiles.com/official_pics/ ... meter3.jpg">

<img src="http://www.spudfiles.com/official_pics/ ... _valve.jpg">

<img src="http://www.spudfiles.com/official_pics/ ... meter1.jpg">

<img src="http://www.spudfiles.com/official_pics/ ... meter5.jpg">

<img src="http://www.spudfiles.com/official_pics/ball_valve1.jpg">

The reason the cannon was side vented was so it could be fired from the stand and still be vented, the end cap could not be unscrewed while on the stand.

The side vented cannon was constructed and worked well, but when I put the circuitry from the stun gun in the 45 elbow, proper precautions were not taken and the stun gun fried its own circuitry. As a result the project was scrapped and the on-board propane meter was disassembled for use on future projects. Here are a few pics of the gun in its skeletal state. The gun used to be much more impressive, but here it is in the current condition:

<img src="http://www.spudfiles.com/official_pics/Picture3.jpg">

Here it is in a sad state of disrepair.....

<img src="http://www.spudfiles.com/official_pics/Picture3_122.jpg">

The launcher on it's stand...

Provided by Boogieman - <a href="http://www.advancedspuds.com/">http://w ... /</a></div>

what program did you use to make those pics, like the 1 of the gas bottle?

This has been asked a thousand times...

You need a 3D rendering program. You can download Rhino for free or you can get other programs such as 3D CAD, although I wont talk about how you would obtain such software because its against forum rules.