SpudFiles

Hello all. i'am new to the forums here i have been building guns for about 3 years on and off... mostly all combustion type guns. Here is the most recent gun i have built. and over under type air gun.

It is built using sch 40 for both barrel and air chamber. The barrel is 1 1/2 inches in diameter and 4ft long. the air chamber is 2 inch in diameter and 4ft 6inch long. Has the schrader valve @ the end to add the air. Also put a psi guage to get air pressure reading. The valve is a basic lawn genie 1 1/2 inch that i bought @ home depot for like 23.00 works awesome. never had any problems with that. it runs off the contol box that holds the three 9v batteries. has a seris of three switches. a toggle and two button switches. its pretty powerful. i have had it up to 110 psi and shot a pvc rocket thru a old computer (had a thick metal casing around it) and went tru the outer casing and in the hard drive. ***PUFF*** - Content removed. Talk of shooting live animals is strictly prohibited. check out the pics and tell me what ya think.


<a href="http://photobucket.com" target="_blank"><img src="http://i2.photobucket.com/albums/y43/md ... 090703.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i2.photobucket.com/albums/y43/md ... 090699.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i2.photobucket.com/albums/y43/md ... 090700.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i2.photobucket.com/albums/y43/md ... 090702.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

looks nice, you would get alot more power if you used a modified sprinkler valve instead of using an electrical solonoid setup. By the way where did you find the NOS arming switch you use? I was looking for one of those to use as a switch.

There's some of those switches on Thinkgeek.com

i found the armins switch @ pepboys.. im not sure if you have one of those were u live. but try autozone too. they deff have them.

I've seen one's like those at RadioShack.

They are generally used as NOS arming safety switches. NOS for a car that is, god forbid you pressed the button nearing a red light by mistake... go safety or go +80 horsepower at a red light. Anyway just upgrade to a blowgun its much stronger due to the faster release of the air from the resevoir. Nice gun though.

I especialy like the part when he was breaking the rules and talking about shooting animals.

***PUFF*** - Content removed. Talk of shooting live animals is strictly prohibited

haha dude dont shoot things that breath

I apoligize for talking about shooting animals. I never have and prolly never will actully kill any "game"...besides the three deer i hit with my car.

Ha,This is exactly like my over and under.
Give credit to the designer.
Members.aol.com/sph911

can an anti-siphon valve be modded?

huse_spud wrote:can an anti-siphon valve be modded?

I am proud too say,I just might be the only person to mod one. If anyone else has tell me,Yes you can mod them, Open up the valve,knock out the flow control knob thing. drill out the hole to make it fit whatever you are going to thread into it.

haha dude dont shoot things that breath

lol . sorry couldn't stop myself