SpudFiles

hey can you use the blowgun from one of these.....?

and could you take the gauge of and place it somewhere else like on your chamber and use the blowgun on a piston valve?
i looked at the prices on eBay and they average at $12.99US i can get them for $6NZD and 1NZD=$0.61US so that like $20NZD i thought ebay was cheap and your 12v air compressors are also expensive compared to http://www.trademe.co.nz

you could use it if u removed the hose setup, or u could keep it. wattever ya no.

I used the exact same thing. Here's the deal:
- It's gonna leak where the hose meets the front end.
- Mine couldn't hold 80 PSI.
- You CAN remove the gauge, but it took me almost two years to do it Keep it in the freezer overnight before you try to unscrew it and be prepared to break a sweat.
From my experience... it's not worth it.

its only $10 so i might give it a go.
i once tried to sleeve a piece of pipe by cutting a chunk outta a 2" piece and sliding it inside another 2" piece.after a month some plastic from the undamaged 2" pipe got onto the other 2" pipe and go "welded" together some how and took me for ever to get it out, im more then prepared tobreak a sweat

I reckon it could work,but don't take my word for it

I got something very similiar to this. It works fine steal the button of the side because i have found they are hard to find and also steal the gauge, You can't do this though if you are hooking it up through the top of the blowgun and not the bottom

yeah i know,and what does the button on the side do?

It dumps the air to the atmosphere (after the valve).

dont matter anymore i bought a blowgun that everyone else uses at super cheap auto for $10 8)