Page 1 of 1

delete

Posted: Thu Sep 21, 2006 6:04 pm
by singularity
gone

Posted: Thu Sep 21, 2006 6:31 pm
by frankrede
combustion should be fine if you use a non flammable wadding.(plastic)

Posted: Thu Sep 21, 2006 7:05 pm
by Velocity
4" barrel should work

Posted: Sat Sep 23, 2006 11:11 am
by singularity
the other thing is will it be fine if i use a normal 1" sprinkler valve with a 4" barrel or do i have to go get like a 2" to 3" valve

Posted: Sat Sep 23, 2006 1:36 pm
by schmanman
a piston valve would be the best.

Posted: Sat Sep 23, 2006 1:39 pm
by LucyInTheSky
I think you could get on with a 1" sprinkler valve as you probly dont want to spend lots of money and need that much power.

Posted: Sat Sep 23, 2006 3:20 pm
by schmanman
a piston valve can be built for surprisingly little. you are probably right, though.

Posted: Sat Sep 23, 2006 3:25 pm
by WOW!!
A 1'' sprinkler vavle would work fine for what you are useing it for.

Posted: Sat Sep 23, 2006 6:26 pm
by Shrimphead
I've heard that 4" is just a little small for the normal rolls of tp. I would suggest unwrapping a little off of the roll before the job... Also the double rolls aren't even close to being able to fit in 4".

Posted: Sat Sep 23, 2006 11:01 pm
by pyromanic13
what do you plug the hole with?

Posted: Sat Sep 23, 2006 11:52 pm
by WOW!!
duct tape

Posted: Sun Sep 24, 2006 6:14 pm
by pyromanic13
does the roll unravle in the air?

Posted: Sun Sep 24, 2006 6:48 pm
by sv490665
Also don't forget to moisten the paper rolls after you get em in your barrel if you want a nice big splat on the houses 8)