Page 1 of 1

Ignition

Posted: Thu Apr 14, 2005 7:15 pm
by v3ngence
Hey, I've been building air cannons for a couple years and wanted to check out the flip side of spud gunning. My combustion gun is a 2" barrel and a 4" x 12" chamber w/ propane injection. The gun works but it sometimes takes a lot of tries to ignite it. Im pretty sure i need to alter the mixture but I was wondering if the spark might not be *strong?* enough. Im using the sparker from a BBQ lighter and yea I was just wondering if its possible for a weak spark NOT to ignite the mix.

Posted: Thu Apr 14, 2005 7:19 pm
by iamthewalrus
thats very possible with a bad mix, there can be to much fule for the spark making it will not ignite. try changing the mix a little, or maybe its the sparker.

Posted: Thu Apr 14, 2005 7:32 pm
by v3ngence
when i tested it it sparked 20 outa 20 times so ill jus tinker with the mix, thnx

Posted: Fri Apr 15, 2005 1:31 pm
by Rehab Ralph
Even though the sparker is sparking 20 out of 20 times doesnt mean that you have a hot enough spark to ignite the fuel.

Posted: Fri Apr 15, 2005 2:19 pm
by iamthewalrus
yeah, if ur mix isnt the problem u should try a stronger spark, like a stun gun or someting, or try adding a chamber fan to mix the fuel better if u dont already have one.