Page 2 of 2
Posted: Sun Jun 05, 2005 3:11 pm
by demon5000
well the chamber size is 2 inches tick and about 5 inches long by the way the screw doesnt have to give a big spark right?cause mine gives a tiny spark.
Posted: Sun Jun 05, 2005 5:04 pm
by true2blue92
to fill that chamber you should only have to spray it for about a sec. or 2 maybe yeah it doesn't really need a big spark just a little
Posted: Mon Jun 06, 2005 4:07 am
by Aaron ?????
i made one just for fun out of a film canister and a conector pen tube and you guys are right it takes only the tiniest amount of fuel
on mine it takes about 3-4 seconds of lighter gas in the chamber for it to work
Posted: Mon Jun 06, 2005 10:52 am
by CS
I think thats what you have to use on the minis because other fuel you cant get in that little of amount. Axe will just flood the chamber.
Posted: Mon Jun 06, 2005 8:22 pm
by demon5000
so what do i use on my mini?lighter fluid?you mean the fluid that you get inside the lighter?
Posted: Tue Jun 07, 2005 5:52 am
by spudshot
yeah, try butane, for a small one i hold down the button on a lighter, but i dont strike the flint. if you have any, try some cologne in a spritz bottle that only sprays out a very small amount, that works good, and when you run out of cologne you can fill it up with something else (i got tons of cologne so i just keep using that, makes the gun smell good)
Posted: Tue Jun 07, 2005 5:04 pm
by demon5000
alright so ima try umm the lighter thing so i just hold the black u looking button.or else ill try cologne but what do i do if it still doesnt work?does ammo have to be a tight fit?
Posted: Tue Jun 07, 2005 7:15 pm
by demon5000
i didnt work ill try again later.
Posted: Wed Jun 08, 2005 8:40 pm
by demon5000
why dont it work?
Posted: Wed Jun 08, 2005 8:56 pm
by CS
Do you have an injection for the butane or are you taking off the cap and trying to get it to go in there? If your trying that all the gas is disapating and hardly any is going in your chamber. So you need to use colonge or make a butane injection system. Hopefully it works for you. Its worth it once you get it done.
Posted: Sat Jun 25, 2005 6:19 pm
by demon5000
well im taking off hte cap.whats a butane injection or whatever you call it?how do you make it?
Posted: Sun Jun 26, 2005 11:25 am
by demon5000
well i sealed it with krazy glue maybey thats the problem?i dont have epoxy.thats why.what else can i use.