Page 1 of 1

Fuel mixer

Posted: Fri Aug 05, 2005 4:58 pm
by saladtossser
has this been done before?
<img src="http://saladtossser.mypicgallery.com/Co ... _large.jpg">
the mixer is a 1.5" pipe with fan blade like tin sheets cut from a can. it is designed to trave up and down a 2" chamber when u tilt it, as the "blade" moves, it mixes the fuel and air in it. i also thought about attaching a Chambah-Chain on it.

Posted: Fri Aug 05, 2005 5:18 pm
by sergeantspud2
what is all the other stuff around it

Posted: Fri Aug 05, 2005 5:23 pm
by saladtossser
a propane meter(first time threading) and a vaccum fan, thats what a 12v motor look like

Posted: Fri Aug 05, 2005 6:30 pm
by sergeantspud2
so what do the other things do?

Posted: Fri Aug 05, 2005 6:34 pm
by saladtossser
the vacum vents a gun and the meter measures propane and injects gas into the gun

Posted: Fri Aug 05, 2005 6:58 pm
by sergeantspud2
i like the idea of the mixer except what about the spark electrodes it will run into those and not get the whole chamber

Posted: Fri Aug 05, 2005 7:51 pm
by saladtossser
my gun is of an over-under design, so the mixer will be on the other end of the chamber when it fires