Page 2 of 2

Posted: Tue Jul 03, 2007 9:43 am
by spudkilla
Modderxtrordanare wrote:I only see two things sticking out, but one of them is his filling valve. (Schrader, Quick Connect, etc..)

Edit: I see the third thing, sticking off the top of the chamber and not the endcap. Pressure gauge probably. :)
Exactly!

Posted: Tue Jul 03, 2007 9:59 am
by lukemc
spud yeti there is no way all pop off valves wil go at exactly the sme time.if you are pumping it up on will always be a tiny bit weaker. now if you had a ball valve or something and another chamber you could dump lots of air instantly and they would all go off

Posted: Tue Jul 03, 2007 10:20 am
by spud yeti
LOL, it wasnt actually my idea, but i agree that it wouldnt be possible really. it was just a funny thought!

Posted: Tue Jul 03, 2007 9:53 pm
by spudkilla
posted an update

Posted: Thu Jul 05, 2007 7:40 am
by bucky242
find some one with a lave and take a piece pipe the same size as the open breach and just make it wider or i have another idea i will post

Posted: Thu Jul 05, 2007 7:48 am
by bucky242
You could use rubber rings on the breach to keep the seal

Posted: Thu Jul 05, 2007 7:50 am
by chaos
bucky you can use the Image button to edit your posts :wink:

just pointing that out

Posted: Thu Jul 05, 2007 3:23 pm
by Modderxtrordanare
bucky242 wrote:find some one with a lave and take a piece pipe the same size as the open breach and just make it wider or i have another idea i will post
First off, its spelled lathe and second off, that made absolutely no sense. You don't make things bigger with a lathe, you turn them down and make them smaller in diameter.


P.S. What are the rules on talking about drugs here. :lol: (see italicized section in quote) Just kidding.