Page 1 of 1

Does Anyone know how to make Camera flash sparkers

Unread postPosted: Thu Oct 20, 2005 9:34 pm
Author: Shandora
im trying to find out how to make a camera flash spakers for my guns but i never can get it right anyone got any suggestions?

Unread postPosted: Thu Oct 20, 2005 10:46 pm
Author: Ballad_Black
Goto getoffmynuts.com. It's an actual site with stupid videos, but one shows you how to make it, a full length video, about 5 mins on how to do it. Its under "Our Videos". Just keep hoveing over pictures of the videos to see what they're about and finally you'll see taser.

Unread postPosted: Thu Oct 20, 2005 11:24 pm
Author: Shandora
yes i have seen that be fore but i havent found a way to ignight it in the cannon

Unread postPosted: Fri Oct 21, 2005 1:15 am
Author: TalonXxX
its around... just search for it. trust me, google goes a long way. do a little research first before just asking for the answer to be handed to you. :shock:

Unread postPosted: Fri Oct 21, 2005 8:18 am
Author: Shandora
listen i have searched for 3 month on the internet. theres a part that im looking for here to do it the camera taser thing is all ican find but i need a way to trigger it inside of my cannon. :evil:

Unread postPosted: Fri Oct 21, 2005 9:15 am
Author: TalonXxX
well i figured out how to do it on the net, so you just weren't looking hard enough. if i come across is again... i will post the link

Unread postPosted: Fri Oct 21, 2005 10:00 am
Author: TalonXxX
it doesnt really get much more complicated than this.... http://www.angelfire.com/80s/sixmhz/camera.html

Unread postPosted: Fri Oct 21, 2005 11:56 am
Author: Ballad_Black
What do you mean, you dont know how to ignite it in the cannon? No matter what you find, thats how to make the stun gun from a camera. You run the wires to screws in the chamber, Its not a difficult process, I promise.
If you cant figure it out you dont need it. Remember that.

Unread postPosted: Fri Oct 21, 2005 2:53 pm
Author: boilingleadbath
<a href ="http://www.spudfiles.com/spud_wiki/index.php/Camera_flash"></discusion></a>

Unread postPosted: Mon Oct 24, 2005 4:40 pm
Author: Timekiller
The only way to fire it in the comb. chamber is mechanicly strike the two contacts with a piece of metal.

BTW... What Shandora is talking about is there is not enough amperage in a camera cap to jump a gap. A taser is built a little diff.

Unread postPosted: Mon Oct 24, 2005 7:49 pm
Author: boilingleadbath
"...mechanicly strike the 2 contacts with a piece of metal."
Not true, at least Galfrisk doesn't think so.

"amperage"
That'd be voltage... which is not entirly true; it just has to be a small gap.

Unread postPosted: Thu Oct 27, 2005 11:20 am
Author: Timekiller
Yes voltage sorry... but the gap would be very small, almost impossible to create without touching.

And you could rig something to strike the contacts, like get an old R/C car remote and servo. Put a piece of metal on it, and when you move the servo, bam! remote firing!

Unread postPosted: Mon Nov 14, 2005 10:12 am
Author: Shandora
he is right my point was that i need it to jump :twisted:

Unread postPosted: Tue Nov 15, 2005 5:54 pm
Author: beebs111
guys look at the hvc 1
topic under official combustion