Damn SS, its been a long time since you last posted here...
In the world of spuds today, I got pissed off about the leak on my nitrogen reg's output, and coated the whole thing in about 1/2" of epoxy paste
Time will tell whether it worked or not. It starts leaking when the output side reaches 300psi, and is a very pronounced hiss at the SCTBDC's normal operating pressure of 450. Normally I wouldn't care, but I only get 15 full power shots out of a tank, and at $4 a shot, I can't afford to waste any on leaks.
I repaired one of my range-shooting rounds for another try tomorrow, attached another 10" of chamber to the SCTBDC (grand total of 68" and ~230 ci now), and made some more 48 layer disks.
Also, at school I mathematically proved that a 2 dimensional shape (sexdecagon?) drawn completely inside a circle actually had
more area than the circle it was drawn inside. The math teacher (P.h.d.)and several others were completely confounded, and the general consensus was that I had broken the universe.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.