QEV'S
- Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
It sure can't do my job
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
- mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
Job for what??? Also, check out E Bay under diaphragm valves. I have gotten about 8 qev's from there in the past month all of them for about 60 dollars shipped!!
Go Bruins!!!!
Sry...building a backyard plinker...with power.
I bought the AQ3000 qev from a local pnu. specialist for $60au
I am not sure what sort of output pressures i am going to get from this unit, fingers crossed a chitload!l but i have various choices for barrels.. from AA battery, multiple ball bearing sizes plus an old .177 air rifle barrel. So it depends on the output to what size i will use.
And a Question on the plumbing... Generally the chamber port will be marked as "Out", the pilot port will be marked as "In", and the barrel port will be marked as "Exh" or "Exhaust" or something similar.
is this correct ?
I bought the AQ3000 qev from a local pnu. specialist for $60au
I am not sure what sort of output pressures i am going to get from this unit, fingers crossed a chitload!l but i have various choices for barrels.. from AA battery, multiple ball bearing sizes plus an old .177 air rifle barrel. So it depends on the output to what size i will use.
And a Question on the plumbing... Generally the chamber port will be marked as "Out", the pilot port will be marked as "In", and the barrel port will be marked as "Exh" or "Exhaust" or something similar.
is this correct ?
- mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
Yes, the top of the valve is your pilot, the bottom is your barrel, and the side is for your chamber. In my opinion, you paid too much, but oh well. You should get decent results as long as you keep your ammo the same size or smaller than your port. Good luck!!
Go Bruins!!!!
- jrrdw
- Moderator
- Posts: 6571
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
"Excellent exhaust characteristicsFexo180 wrote:Will this QEV do the job?
http://www.smcaus.com.au/files/products ... 073__1.pdf
I have the SMC AQ3000-03.. all 3/8 threads.
Large flow capacity"
The flyer says so...
mattyzip77 wrote:Yes, the top of the valve is your pilot, the bottom is your barrel, and the side is for your chamber. In my opinion, you paid too much, but oh well. You should get decent results as long as you keep your ammo the same size or smaller than your port. Good luck!!
THX matty!! My 'understanding' wife thought i paid to much for it aswell lol.. but i did ring 3 different suppliers with 2 very outrages prices for the same valve... $61, $111 & $156 !!! so i think i got a bargain at $61..LOL
I need to get some more brass fittings today and a shop gun.
One the filling/piloting side of the qev would it be ok to downsize it to 1/4
instead of 3/8 to shrink it a little?
but still run the same tooling.?.
e.g.... male quick connect/ball valve/t piece into qev.. off the bottom of T piece run the shop gun or eventually a push button or toggle pilot.
Pics to come over the weekend.
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
Yeah that should be fineOne the filling/piloting side of the qev would it be ok to downsize it to 1/4
instead of 3/8 to shrink it a little?
but still run the same tooling.?.
e.g.... male quick connect/ball valve/t piece into qev.. off the bottom of T piece run the shop gun or eventually a push button or toggle pilot.
- mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
Like crowley said yea. Get a adapter down to a quarter of a inch, add a ball valve and a male quick connect and your good to go. You can fire it using the ball valve. If you want a diff set up just ask and someone should help u out. I paid too much for my first valve too thats why I always tell members to check e bay. Peace!!!!
Go Bruins!!!!
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
I'm not in the habit of agreeing with women but she has a point.Fexo180 wrote:My 'understanding' wife thought i paid to much for it aswell
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
same is the input pressure lol its just a release valve not a pressure boosterFexo180 wrote:I am not sure what sort of output pressures i am going to get from this unit, fingers crossed a chitload!l
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
- POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
Bake a cake and let her buy pneumatic stuff for youI'm not in the habit of agreeing with women but she has a point
Children are the future
unless we stop them now
unless we stop them now
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
That's harsh
hectmarr wrote:You have to make many weapons, because this field is long and short life
HAHAHA that's Gold!!POLAND_SPUD wrote:Bake a cake and let her buy pneumatic stuff for youI'm not in the habit of agreeing with women but she has a point
My wife IS my sugar mama 8)
Got all my brass bits, just need to sort out a chamber vessel then slap this puppy together.
- mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
Sugar Mamas are cool!! Let us know how you make out!! 8) 8) 8)
Go Bruins!!!!