... air gun. It has an inverted lock, for this purpose. It's a pump gun. With 9 pumps it has 10X which is the pre-compression pressure of the hybrid. The small air pump has a 17 mm diameter piston, and the butane dosing system is the one I usually use for these pump weapons. The firing barrel ...

This is a project called "Armadas 1500 II". It is a weapon that works with an integrated air pump, it is a single shot, hybrid that precompresses at 8X - 10X. The firing barrel is with 12 microgrooves, caliber .25 and fires common pellets. The inverted bolt is made of 1045 steel, the ...

... therefore opens too early. On the combustion chamber side, it is 6.5 mm in diameter and on the pilot side, 8 mm in diameter. the pressure of the hybrid is 8X. Do you think I can increase the area of the pilot's side more? up to how much diameter? What is the ratio they use? I have thought about ...

I want to show a test of the system for my new hybrid to repeat. I finished building it today, and it works fine. I have to sort a little all the elements that are currently scattered on the work table. I'm working at 5X for testing, and it will ...

I am planning to build a low compression hybrid, about 3 or 4X, which uses manual force, :roll: using the bolt to compress the mixture. I have thought about using the firing gun, with a previously defined volume, to dose the butane. At the end ...

... whole assembly. The idea is to increase the power, by increasing compression in the "B" chamber, without needing a more complicated air pump. The hybrid is inflated to 80 psi, and would only increase the amount of air in the two chambers. I estimate that the pressure of the chamber on the side ...

I carried out tests of the system for repetitive firing of the new hybrid that I plan to build :D The caliber will be small, (according to my possibilities of making noise and space), .25, with steel pellets or diabolo, I have not decided yet. n the tests, ...

This is the project that I am working on. It is the prototype 4, of the series of autonomous hybrids. I plan to introduce improvements, in several aspects. The dosing unit will be activated by the piston rod of the combustion chamber, just like in my semi-automatic hybrid. ...

... everything is in sight. It is the simplest, easiest and fastest gas dosing system to build, and it does not fail. :D The weapon is an autonomous hybrid that shoots steel balls of 1/4 ", to 8X. The air pump has been optimized to achieve that pressure, without much force, with 7 pumps. The tube ...

I am testing this small 7X hybrid that shoots 1/4 "steel spheres, it has the new hybrid system, with a spring, I have also finished the charging station with the new gas rapid doser design. I have to make the corresponding video to share ...

... diagrams etc of the new thing that I have built. I have created a new publication for clarity, otherwise everything becomes a bit confusing. This hybrid weapon works with 5 bar of pressure and pure butane as fuel. The firing cannon is purchased, 24 "long, 12 micro striae and .25 caliber, 6.35mm. ...

Hello !! I was thinking about making a small, handheld semi-automatic. I will try my best to expand this idea Project of a semi-automatic hybrid, topic I planted In another post, but briefly. I have prepared some simple drawings To explain to me on this question. It works like this: 8) The ...

I was trying to build a small hybrid .22 low pressure gauge, and it was for this reason the questions that I asked and kindly answered here. After looking at many publications here, I decided to give it a try. In the end it ended up working ...