Has anyone played around with different angles for the the flat line barrels?

Try using a small spark plug off a RC engine and use a lighter refill valve epoxy in a small hole on the chamber so you can just use lighter aerosol refill gas, just one or two quick burst with the gas, you won't loose any gas that way

Try using a small spark plug off a RC engine and use a lighter refill valve epoxy in a small hole on the chamber so you can just use lighter aerosol refill gas, just one or two quick burst with the gas, you won't loose any gas that way

all fixed the hole on the lid just had to be bigger thanks for the help

thats the only one they had and im too impatient to wait till next monday lol

okay, i flip Snapshot_20111026_4.JPG to barrel end and seal the "bleed" holes in the lid and it holds about 130 psi.....fixed now no quick busts when squeeze the trigger, air just comes out real slow, its not blocked, should i drill out the hole bigger?

last pic ( Snapshot_20111026_4.JPG) i have it chamber side, though i did have it barrel side with same probs. i just putty up the bleed holes in Snapshot_20111026_2.JPG, going to see if it works....

there isn't a manual bleed lever just a metal rod that goes through the guts, and no extra holes in the grommet seal on the lid

http://yard-boss.com/store/sc_images/pr ... _image.jpg[/img]

Hi guys I've read numerous posts in regards to modding sprinkler valves. But none have mentioned the rain pro valves. They have just a solenoid in the middle that's it, I have replaced the solenoid with a blow gun trigger everything fits all sweet problem is air keeps leaking through the barrel, I'v...