Well the burns are from the old bolts i had that were to small ive replaced them with bigger bolts, no more burns. Um its got a metering system, i use that presure guge to measure the propane, you probly just cant see the ball valves in that pic. Never had any leaks if i did i would put hose clamps ...

Well title says it i finally got off my but and took some pics of it. It's got a 4.in by 2ft chamber and 5ft 2in sleeved in 2in for the barrel. It's got good power and thats about it. O got a chamber fan just got to install it. http://img237.imageshack.us/img237/4403/200811190372pq3.th.jpg http://im...

I've built one of those slit 2" crammed into a 2" and there's no way it is as good a performer as an SDR 21 barrel. For one, making one any longer than 4 feet or so is virtually impossible

I built a 5FT one and it was acually very easy to sleeve.

You know a frozen paintball is like shooting rocks. Maybe you should just talk to him and tell him its not funny and to stop it. He dosent seem like a very good freind... my freinds never shot my car or house with anything.

Haha this is funny i got a scooter (found it in the trash got it running) its a yamaha raz. Well the funny part is i jumped it last sunday and well i fell and got a concusion and horrible road rash on my arm leg and chest. I jumped it from the dirt to the road witch was right around 15Ft. So that wa...

Well i made somthing like this awhile ago exept i took some brass tubing i got from a hobby shop and cut 5in. pieces tape them together and cut slits at the top and bottom of each pipe and put a oring over it so it could hold the bb's in place. And then put them in the barrel witch was 3/4in it work...

I think it acts like a ball detent just like on a regular paintball marker. It holds the paintball in place so it can roll down the barrel.

Yea i was looking at mine and i cant seem to find anything DWV or nsfpw on it. I know alot of people use them i was just wondering if they were using nsfpw or DWV. So my question is even if mine was DWV would it be safe? That would be the only DWV piece on the cannon.

I got another question i have one of those end caps that have the threads on it then you screw on the plug are those safe to use? I couldnt figure out if thier pressure rated or not.

Ralphd Im going to get the coupling and bushing you showed thanks everybody for the help. EDIT well None of the stores near me carry presure rated PVC pipe anymore so that puts a halt on my project until i can find some locally :( (they just carry some soft core stuff not sure what it is but it says...

ALright then do they make pressure rated bell reducers? If so ill get those when i go for my pipe and end cap.

Thanks i'll half to look for one around me. Not saying your wrong but i read that you should only use bushings for propane powered ones not bell reducers?

Well i finally getting away from the spray and pray spud guns and going into the advanced spud guns so far i've got the meter built and working and the barrel (1and1/2 in. 6ft pressure rated). But i need help on connecting it to 3in. chamber. I know you shouldn't use the bell reducers and use bushin...

Alright i need a regulator under 80$ that screws on directly to a co2 tank and this is what i found please tell me if it will work and if it wont give me one that will.
http://cgi.ebay.com/NEW-CMI-INLINE-R-20 ... dZViewItem