I think the fact that this forum is slightly active at all is because it's more or less the only such forum left, at least in the Anglosphere. There is also the Francophone "Patator" forum that used to be very active but it's even more quiet now, there is a post from more than 5 years ago lamenting...

I would like to focus the conversation on the possibility of turning on a high pressure chamber with a lower pressure one, which is the subject of your publication. what you explain about increasing the pressure with two connected chambers, I know well, because I have already talked about it here. ...

I think I'm late. Most of the posts were made 15 years ago. I missed the most active period of the forum. Is there a more active forum now? Or a telegraph group or something?

I would like to focus the conversation on the possibility of turning on a high pressure chamber with a lower pressure one, which is the subject of your publication. what you explain about increasing the pressure with two connected chambers, I know well, because I have already talked about it here. ...

I would like to focus the conversation on the possibility of turning on a high pressure chamber with a lower pressure one, which is the subject of your publication. what you explain about increasing the pressure with two connected chambers, I know well, because I have already talked about it here. ...

[quote = hect marr post _ id = 390501 time = 1668124175 user _ id = 18293]nI希望将谈话的重点放在用低压腔打开高压腔的可能性上，这也是您出版物的主题。你解释的用两个相连的腔室增加压强，我很清楚，因为我已经在这里讲过了。为了简单起见，我更喜欢使用一个低压点火室，尽可能小，和一个单向阀校准打开需要。我认为它会工作得很好，你必须做一些测试。8-) n[/quote] Well, actually, my secondary ignition device is almost finished. At present, I am...

[quote = hect marr post _ id = 390501 time = 1668124175 user _ id = 18293]nI希望将谈话的重点放在用低压腔打开高压腔的可能性上，这也是您出版物的主题。你解释的用两个相连的腔室增加压强，我很清楚，因为我已经在这里讲过了。为了简单起见，我更喜欢使用一个低压点火室，尽可能小，和一个单向阀校准打开需要。我认为它会工作得很好，你必须做一些测试。8-) n[/quote]Well, actually, my secondary ignition device is almost finished. At present, I am ...

check valve and rupture disc You can use. It will be very delicate to only one check valve so that it does not open prematurely... I tried a valve in these conditions and if you adjust it too high, it does not open, and if it is too little, it loses on the side with the highest The less pressure ch...

check valve and rupture disc You can use. It will be very delicate to only one check valve so that it does not open prematurely... I tried a valve in these conditions and if you adjust it too high, it does not open, and if it is too little, it loses on the side with the highest The less pressure ch...

What is his method? I don't understand. Do you use electric heating wire to ignite? Using a hot wire doesn't really work well, I've tried this with an atmospheric combustion to make the point: https://youtu.be/OmLNm6Myg7s Compare the delay with a spark: https://www.youtube.com/watch?v=CyaMRqjAfKo W...

I see it more practical to turn on, for example, a camera at 80X, use an intermediate disk that breaks at 100X, and a camera turned on at 15X, which I think will break the disk. It should generate about 120 bar, the ignition chamber. To make it practical, design engineering is needed. I am afraid t...

I'm thinking of using 1mpa low mix to ignite 5mpa high mix. 5 mpa would be 50x, I haven't got any personal experience with it but I would say the wire method Larda used is a simpler way to go about it - you have to replace the wire every time, but it is easier than having to fill two separate chamb...

Firearms generate tens of thousands of psi of chamber pressure, so if you keep the same caliber and projectile weight, achieving similar power is impractical with a hybrid. https://i.imgur.com/32QQPsG.jpg Using a 50x mix and a 30 inch barrel with approximately 2:1 chamber:barrel volume ratio, I got...

I don't know if anyone has made a specific side by side comparison, but while the ratio of oxygen to propane is the same in both cases, there are important differences. Working with pure oxygen is a lot more dangerous so it is less practical, and there is a danger of DDT especially at higher mixes....

In fact, I have used 12 times of pure oxygen and propane to accelerate a steel ball with a diameter of 10.5mm and a weight of 5g to 575m/s. According to the kinetic energy formula, this steel ball carries 800j of energy, which has far exceeded the kinetic energy of a 9mm pistol, so I think it is pos...