Interesting, my only concern is that since the o-rings have a large diameter, even though they are balanced there will be considerable friction at higher pressures so a larger force will be needed to actuate the cartridge. Yes, it is probably as you say. I thought about using it at about 15 bar whi...

Interesting, my only concern is that since the o-rings have a large diameter, even though they are balanced there will be considerable friction at higher pressures so a larger force will be needed to actuate the cartridge. Yes, it is probably as you say. I thought about using it at about 15 bar whi...

Vadim wrote:Well, you probably right. Thank you for advice!

Я могу помочь.Я уже делал гибриды,даже не один,увлекался этим. Напиши https://vk.com/id111087416

I agree that using the projectile as a "burst disk" in a detent would probably be the simplest way to implement this. Any energy spent moving the piston is energy that is lost. The critical part would be ensuring that the projectile is more or less airtight so that no gas can flow around it. Here i...

Hello I want to make a airgun that uses a solenoid valve. I have looked for an hour but I can't find a valve that will fit my needs. I need a valve that can withstand 300 bar, open quickly, and run off of 12 volts. Thanks for helping me out I am a huge noob when it comes to this stuff but I really ...

I tried to make a balanced valve and I did it. The flow area in the valve is now 8.5 mm, piston diameter 7 mm. Such a valve opens with a light drummer and soft spring, tested at a pressure of 70 atm. The lead ball after the shot went into the board by 30 mm, the air in the tee is enough for 2 shots.

At what pressure does the hho compress the combustion chamber? Or shoot at atmospheric pressure? I ask because I can not understand anything in the video. In the future I will try to learn the Russian language, apart from English, (and my own better one). :shock: It would be good to see the physical...

I also did the hydrogen gun. The sound of the shot is very sharp and strong, but the bullet flies slowly. Perhaps this is because the tank is small.
[youtube][/youtube]

wow, this is a gun!The first time I see this!

Made a gun of 40 mm caliber, used a piston valve. The gun works well at pressures up to 20 atm, no longer possible, because the rubber on the piston is torn.
[youtube][/youtube]
here is an approximate diagram of the valve. Used a coarse water filter.

I plan to make just such a pneumatics. There won't be much of a rock, 20-40 atm, depending on the diameter of the pump rod. Perhaps the pump handle will play the role of fits. I know that this is not the most effective scheme, but it must be done.

warm, only -5, snow. I understand that the flow section should be more, but this requires large parts, they are expensive, but I can not afford to spend a lot of money on a hobby. And further. Was everything okay with the site? From 07 to 15 November, I could not create a topic, could not answer, ga...

I thank for the scheme, I just experiment with a large caliber. I make a valve with a large flow area

[youtube][/youtube]

Please give links to sites similar to this one. It is necessary that it would be discussed precisely homemade pneumatic gun, very interesting. I could find it myself, but because of the language barrier I always get to the sites with industrial pneumatics, it’s not interesting, I can read it too. I ...

Theory and development is listed in this thread with plenty of other designs and configurations discussed.[/quote] In minute 0, 34 of the video the ammunition hitting the target sound better than my drummer! :shock: jajajajaja :bounce:[/quote] [youtube]https://youtu.be/IBdYoMJ4SoA[/youtube] I also d...