That stock would be pretty to look at if the old lacquer was removed, woods sanded to 2500 grit and then oiled/waxed....

After 4 months of tedious work, I got my bikes engine rebuild and running. Old crack in the crankcase was welded shut and all seemed to be working smoothly. After 200kms of happiness and wheelies, the weld broke and dunk all the oils to my boot. So in a need of a replacement. Well, managed to find a...

Nah, haven't seen those on the Defence forces... I work with Patria XA series... Mostly 185,202,203. Mounted with 12.7x107 NSV

Same here, the military is keeping me busy. Knives and homemade lanchers have changed to APCs and machine guns

Well I have a Dr650 which I have pretty much build for adventure and enduro, though with slicker tires it does fine on tarmac...

Why on earth would streetbikes be at the dirt roads?:D

No need, thumpers are not fast but thy sure are fun and usefull

Oops.. :D Maybe 10.5:1 compression is too much for a single cylinder 650cc thumper... https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfl1/v/t1.0-9/12313933_10206812751029407_7238680488476974844_n.jpg?oh=0253f05fa5aa2e9807df37a8ba34562c&oe=56E7A902 https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtp1/v/t1...

Awesome little project you got here, and nice to see more Finns catching up he hybrid bug! What kind of projectiles are you planning on launching out of it?

A combustion with metered fuel and large enough combustion chamber should easily chuck those projectiles from 3" bore to those distances with ease...

And if not, go hybrid

Slic3r looks stable now, 5 months ago it was going through seriously bug fixing, but eventually came out on top again with a very well designed 3D printed support algorithm that allowed lightweight, low density break-away support for overhangs exceeding 1:1. And I was wondering why my support were ...

Quick, dirty and handy. That's the way I like it... :D Well, maybe not but it represents the latest knife project I have been working on. Wyz came to me asking for a small but handy knife, so I started working on it. Blade is 1080 carbon steel and the handle is teakwood. Modeled after what I see as ...

Started making a base for my new anvil, finally I get one that is at the right height for me (as I'm a bit of a midget...) As the crisis in Europe seems bad and Russia is oppressing everyone I decided to make it nuclear war proof, wimpiest steel thickness is 6mm and that just for the corners... :D A...

I have gen 2, Pro model. Didn't have to buy anything, and most problems consisted of prints not sticking to the bed, prints were not solid, belt tension and extruder calibration was waay off etc. I have made the anti backlash mod for it, printed new extruder, atm i print to glass, had to change the ...

Haven't heard about that printer before, but from my experience with my Solidoodle i must say that ready out of the box printer within this price range seems impossible. Also the print quality out of the box is usually pretty bad. My solidoodle took almost 2 weeks adjusting and trial and error to ge...

Had a fun day of shooting with my welder

[youtube][/youtube]