Difference between revisions of "Sprinkler valve"
m (typo in link (not mine)) |
m |
||
| Line 1: | Line 1: | ||
The next step up from a [[ball valve]], this is essentially a commercially produced [[diaphragm valve]]. However, they are unfortunately designed to open relatively slowly to prevent "water hammer". The performance can be improved by replacing the stock solenoid-valve vent with a [[pilot valve]] with more flow. Most often this is a blow gun, although for larger valves a ball valve or even a smaller sprinkler valve can be used. This operation is often called [[sprinkler valve modification|modding]] the valve. | The next step up from a [[ball valve]], this is essentially a commercially produced [[diaphragm valve]]. However, they are unfortunately designed to open relatively slowly to prevent "water hammer". The performance can be improved by replacing the stock solenoid-valve vent with a [[pilot valve]] with more flow. Most often this is a blow gun, although for larger valves a ball valve or even a smaller sprinkler valve can be used. This operation is often called [[sprinkler valve modification|modding]] the valve. | ||
| + | |||
| + | [[category:valves]] | ||
Revision as of 14:48, 24 October 2005
The next step up from a ball valve, this is essentially a commercially produced diaphragm valve. However, they are unfortunately designed to open relatively slowly to prevent "water hammer". The performance can be improved by replacing the stock solenoid-valve vent with a pilot valve with more flow. Most often this is a blow gun, although for larger valves a ball valve or even a smaller sprinkler valve can be used. This operation is often called modding the valve.
