Barrel

The barrel is the pipe used to launch the projectile, and is, along with the chamber, the only component found in all launchers. The diameter determines what projectiles will fit in the launcher, and the length affects how much energy is transferred to the projectile.

Modifications and improvements to the basic barrel include sleeving, rifling, hop-ups and flatline barrels.

There are many diameters of barrels popular in spudding, below are some that fit certain ammo:

• 4.5mm brakeline - fits bbs, good for BBMGs
• 6mm brakeline - fits airsoft bbs, a commonly used ammo in BBMGs.
• 3/4" CPVC, 3/4" sch 80 PVC (looser fit), or 3/4" sch 120 PVC - fits .68" paintballs
• 1/2" sch 40 PVC - fits AA batteries, marbles.
• 3/4" sch 40 PVC - fits 12g CO2 cartridges, C batteries.
• 1" sch 40 PVC - D batteries, smaller sized bouncy balls.
• 1.25" sch 40 PVC - fits somesort of battery
• 1.5" sch 40 PVC - a common size, good trade-off between power and potato usage. Available rifled from the SGTC
• 1.5" sdr 21 PVC - fits golfballs. Traditionally sleeved within SCH-80 PVC.
• 1.5" sdr 26 PVC - fits golfballs, but it is thinner than sdr 21, so the golfballs fit a little looser. Traditionally sleeved within 2" SCH-80 PVC.
• 2" sch 80 PVC fits sdr 21 and 26 pipe well. Also used as a golf ball barrel by itself, with the golf ball held in place by a rag patch, or other wadding. Also fits normal light bulbs! Details here: http://advancedspuds.com/concreteballs.htm
• 2.5" sch 40 PVC - fits tennis balls well.
• 3" sch 80 PVC - fits many drink bottles well.
• 3" sch 40 PVC - fits normal cans, and empty propane torch tanks