Difference between revisions of "Safety valve"
Saladtossser (talk | contribs) m (or not oe) |
|||
Line 1: | Line 1: | ||
− | [[Image:Pop_safety_valve.jpg|right|thumb|250px|A 125psi pop-safety valve]]A '''safety valve''', also known as a '''pop-safety valve''' | + | [[Image:Pop_safety_valve.jpg|right|thumb|250px|A 125psi pop-safety valve]]A '''safety valve''', also known as a '''pop-safety valve''' or '''pop-off valve''' is a device installed on a chamber to prevent over-pressurization. They are available in a wide range of pressure ratings, from pressures lower than you'd want to use in a spudgun to pressures higher than a PVC chamber will hold. |
These are most commonly installed when you are using a [[pressure regulator]], so that if it malfunctions it won't fill your chamber to the point where it fails, although no such event has been <i>recorded</i>. | These are most commonly installed when you are using a [[pressure regulator]], so that if it malfunctions it won't fill your chamber to the point where it fails, although no such event has been <i>recorded</i>. | ||
Revision as of 17:15, 26 October 2005
A safety valve, also known as a pop-safety valve or pop-off valve is a device installed on a chamber to prevent over-pressurization. They are available in a wide range of pressure ratings, from pressures lower than you'd want to use in a spudgun to pressures higher than a PVC chamber will hold.
These are most commonly installed when you are using a pressure regulator, so that if it malfunctions it won't fill your chamber to the point where it fails, although no such event has been recorded.
This article is a stub. You can help by expanding it