Difference between revisions of "Sprinkler valve modification"
m |
|||
| Line 1: | Line 1: | ||
| − | This refers to | + | This refers to '''modifying''' a [[sprinkler valve]] to actuate via a pilot valve with a higher flow then the solenoid—typicaly a blowgun, although larger valves (1.5-2" and up) require something with more flow to preform well. The larger vent decreases [[opening time]], and does not require batteries like the stock solenoid. A step by step tutorial of the process is available at [http://www.spudfiles.com/forums/viewtopic.php?t=305 Spudfiles] |
| − | + | The faster the pilot valve, the faster the actuated valve will open. This means that performance can be increased by using [[QEV]]s, which offer the additional bennifit of eliminating the human variable. This should yield more consistant muzzle velocities. | |
Another modification that can be made is enlarging the pilot leak hole. If the Sprinkler valve is opened it contains a large diameter rubber disk (called the diaphragm). About 1/2-1" in somewhere around the diaphragm (in a oftenly used [http://www.orbitonline.com/index.cfm?fa=watermaster.product&productid=201 Orbit Watermaster] sprinkler valve) will be a small white plasic piece poked through the diaphragm. If this piece is removed, the pilot area above the diaphragm will be pressurized instantly while the cannon is being filled, and so the valve will be more sensitive and will (in some instances) seat better. | Another modification that can be made is enlarging the pilot leak hole. If the Sprinkler valve is opened it contains a large diameter rubber disk (called the diaphragm). About 1/2-1" in somewhere around the diaphragm (in a oftenly used [http://www.orbitonline.com/index.cfm?fa=watermaster.product&productid=201 Orbit Watermaster] sprinkler valve) will be a small white plasic piece poked through the diaphragm. If this piece is removed, the pilot area above the diaphragm will be pressurized instantly while the cannon is being filled, and so the valve will be more sensitive and will (in some instances) seat better. | ||
[[category:valves]] | [[category:valves]] | ||
Revision as of 21:15, 24 October 2005
This refers to modifying a sprinkler valve to actuate via a pilot valve with a higher flow then the solenoid—typicaly a blowgun, although larger valves (1.5-2" and up) require something with more flow to preform well. The larger vent decreases opening time, and does not require batteries like the stock solenoid. A step by step tutorial of the process is available at Spudfiles
The faster the pilot valve, the faster the actuated valve will open. This means that performance can be increased by using QEVs, which offer the additional bennifit of eliminating the human variable. This should yield more consistant muzzle velocities.
Another modification that can be made is enlarging the pilot leak hole. If the Sprinkler valve is opened it contains a large diameter rubber disk (called the diaphragm). About 1/2-1" in somewhere around the diaphragm (in a oftenly used Orbit Watermaster sprinkler valve) will be a small white plasic piece poked through the diaphragm. If this piece is removed, the pilot area above the diaphragm will be pressurized instantly while the cannon is being filled, and so the valve will be more sensitive and will (in some instances) seat better.
