Bruiser

Just build a cannon and want to show it off? Post it in here.

Postby BigBang » Fri Jul 01, 2005 1:38 pm

Hey Gang,

Here is my first pneumatic. I had been wanting to build a smaller cannon that I could shoot easily in my back yard. After watching the threads on GGDT 4 I got interested in making a pneumatic. What I came up with was this muzzleloading paintball rifle. One of my friends said the paint job was the same color scheme as a big bruise - thus its name. The entire rifle is double walled, and while it is difficult to see in this image, the bipod is made of a 1.5" t-fitting that I opened up a bit. As a result, the rifle can freely swing and rotate on the bipod in all directions.

<img src="http://www.spudfiles.com/uploader/uploadFiles/PaintballRifle.jpg">

The barrel is made from 0.75" CTS CPVC. I sleaved this into 1" CTS CPVC and held it all together with Gorilla glue. The barrel is quite rigid, and is of course a perfect fit for paintballs. The barrel length is 36", and the overall length of the rifle is 56". You can also see the safety pressure release valve in this image.

<img src="http://www.spudfiles.com/uploader/uploadFiles/Muzzle.jpg">

Here is a close-up of the action. I used a Deltrol QEV that I bought from McMaster Carr. I polished it up with the wire wheel on my grinder and was surprised at how well it turned out. I also put a ball valve safety in there and situated it so that I could actuate it with my thumb while aiming. The trigger is a little push button valve I also bought at McMaster Carr (part #62475K11). Also, for reference, to keep the pilot volume low I plugged the butt stock of the rifle with plumbers epoxy just to the left of the both the push button trigger and the ball valve safety.

<img src="http://www.spudfiles.com/uploader/uploadFiles/Action.jpg">

Here is the "filling station." I got the idea from D_Hall's website. I bought the low pressure "Palmer Tire Stabilizer" from Air Soldier Products for $95. Whew, that was expensive, but I wanted something portable other than a bicycle pump.

<img src="http://www.spudfiles.com/uploader/uploadFiles/FillingStation.jpg">

As for performance, I just about blew a hole in my garage door the other night at only 80psi. The QEV is rated to 125psi. At this max pressure GGDT says I'll get a little over 600fps. That is, of course, if I did my GGDT model right. At this point I have just modeled the QEV as a generic valve. Does anyone know how to model the valve more exactly? It didn't dawn on me to take the valve apart and do the proper measurements till it was all assembled. Doh!

Note to PCGuy: Feel free to use these images at SpudFiles if you wish.

Happy 4th of July
BigBang
 
Posts: 155
Joined: Thu Jul 31, 2003 11:45 am
Location: USA
 

Postby spudman029 » Fri Jul 01, 2005 2:16 pm

WOW! Nice RIFLE!

EDIT-Is that really your first pneumatic? Mine was no way near as good.
spudman029
 
Posts: 1025
Joined: Wed Dec 08, 2004 5:31 pm
Location: USA
 

Postby Freefall » Fri Jul 01, 2005 2:19 pm

If you can still unscrew the screws that are holding the valve together, it shouldn't matter that it's assembled already.

That's a slick looking gun. Great job!
Freefall
 
Posts: 3252
Joined: Tue Jul 29, 2003 4:46 pm
Location: USA
 

Postby sonicst0rm » Fri Jul 01, 2005 2:59 pm

What's GGDT? Link?
sonicst0rm
 
Posts: 87
Joined: Mon Jun 20, 2005 10:41 pm
Location: USA
 

Sponsored

Sponsor
 
 

Postby jasonsmithmyer » Fri Jul 01, 2005 3:01 pm

Someone had told me that you aren't supposed to use a PVC chamber when filling with CO2 because of the temperature shock that the cold CO2 has on the PVC. It makes it brittle or something. Am I Just crazy or is that true. The reason I ask on this post is cause he's using a CO2 canister to fill his Gun.

Awesome gun, I love to see cannons and the like that are actually made to look like real guns.

What is the pressure rating on that valve?
jasonsmithmyer
 
Posts: 147
Joined: Wed Mar 23, 2005 12:44 pm
Location: USA
 

Postby Krazy_K » Fri Jul 01, 2005 3:23 pm

Nice gun man, that thing is beautiful, especially for a first. Jason, CO2 is fine to use, you should just make sure that you have the bottle upright so you don't get any liquid and dry ice forming and you should be ok.
Krazy_K
 
Posts: 295
Joined: Wed May 11, 2005 2:03 pm
Location: USA
 

Postby greeneyedboy5 » Fri Jul 01, 2005 3:46 pm

tHAT LOOKS REALLy NICE. great jOB. i LIKE THE C02 FILLER UPPER.
greeneyedboy5
 
Posts: 300
Joined: Thu Oct 07, 2004 10:58 pm
Location: USA
 

Postby Freefall » Fri Jul 01, 2005 3:55 pm

<blockquote id="quote"><font size="1" face="tahoma,verdana,arial" id="quote">quote:<hr height="1" noshade id="quote">What's GGDT? Link?<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
I'd suggest trying the search button, but I know you'd find hundreds of results, far too many to search through.

Or you could try Google. But again, the first few pages have links that mention it, but don't say where to get it.

So: here you go:
http://www1.iwvisp.com/thehalls/ggdt/index.html

You need a couple files that you may or may not already have. These files are linked on the installation page so if you get errors because you didn't follow instructions, go back and read them again.

GGDT is a powerful tool, and as such, has a bit of a learning curve. Fortunately, it's not very steep, and the "usage" and FAQ" links on the GGDT homepage should answer most of your questions.
Freefall
 
Posts: 3252
Joined: Tue Jul 29, 2003 4:46 pm
Location: USA
 

Postby Mr.Plow » Fri Jul 01, 2005 3:59 pm

Whoo wee!

Do you use Krylon Fusion for the paint? I can't get over how NICE that looks!

Excellent cannon, I LOVE the design!
Mr.Plow
 
Posts: 3932
Joined: Fri Aug 29, 2003 11:48 pm
Location: USA
 

Postby BillyBobJoe » Fri Jul 01, 2005 4:27 pm

WOW! NICE! Very professional looking! I love the Palmer Stab. Setup. Did the 3/4" fit nicely into the 1" CPVC? Thats a good idea . . .:D
BillyBobJoe
 
Posts: 1401
Joined: Fri Mar 19, 2004 5:41 pm
Location: USA
 
 
Next

Return to Finished Cannons

cron