Use Your Ear Plugs!

Just build a cannon and want to show it off? Post it in here.

Postby BigBang » Fri Jul 01, 2005 1:59 pm

Hi Gang,

Here is another project I just finished this week - in preparations for the 4th of July! It is a carbide cannon. It doesn't launch anything, but does make a VERY loud bang. I got the idea from one of my cousin's kids who built one from the plans in "Backyard Ballistics." Mine is quite a bit different, however, and is of my own design. The overall length of the cannon is more than two feet (EDIT: It is 33 inches long to be precise). The barrel is made of 1.25" SCH 40 PVC. The reservoir is made of 2" SCH 40 fittings, and the legs are of 1" SCH 40 PVC.

<img src="http://www.spudfiles.com/uploader/uploadFiles/CarbideCannon.jpg">

Here is a closeup of the reservoir. I am using a modified Coleman lantern lighter for ignition.

<img src="http://www.spudfiles.com/uploader/uploadFiles/Reservoir.jpg">

Here is the fuel source and loader. I just put a pea sized amount of Bangsite in the hollowed out recess in the loading rod. As I screw the end cap into the back end of the reservoir, the Bangsite spills into the reservoir, which has previously been filled with water. The Bangsite (just powdered Calcium Carbide) disolves and gives off acetylene gas. The spark from the lantern lighter does the rest. BANG! Man, is it loud!

<img src="http://www.spudfiles.com/uploader/uploadFiles/Fuel.jpg">

It turns out that the Bangsite is made by the Conestoga company. Guess what else they make? Big-Bang cannons! (http://www.bigbangcannons.com/) Who knew? Well, probably everyone but me.

Note to PCGuy: Feel free to use these images at SpudFiles if you wish.

Happy 4th of July,
BigBang
BigBang
 
Posts: 155
Joined: Thu Jul 31, 2003 11:45 am
Location: USA
 

Postby spudman029 » Fri Jul 01, 2005 2:19 pm

WoaHWoaH, might not be the best idea to use acetylene gas in the sch40 cannon, or any cannon. But nice paintjob.
spudman029
 
Posts: 1025
Joined: Wed Dec 08, 2004 5:31 pm
Location: USA
 

Postby SilentJ » Fri Jul 01, 2005 2:45 pm

I like the paint job! The stand looks sweet, too. Good work!:D
SilentJ
 
Posts: 62
Joined: Tue Jun 28, 2005 12:50 pm
Location: USA
 

Postby sonicst0rm » Fri Jul 01, 2005 2:57 pm

acetylene + potato guns = death

seriously...

Acetylene explodes, it doesn't just burn. My friend threw some calcium carbide in a puddle, and threw a sparkler in it. Sure enough, it made the biggest explosion i've ever heard.
sonicst0rm
 
Posts: 87
Joined: Mon Jun 20, 2005 10:41 pm
Location: USA
 

Sponsored

Sponsor
 
 

Postby Krazy_K » Fri Jul 01, 2005 3:27 pm

Yeah that's not really too safe. It looks great but think about using propane or deodorant, acetylene, as sonic said, detonates, propane deflagrates and is much safer. It looks like fun, but only until it explodes in your face.
Krazy_K
 
Posts: 295
Joined: Wed May 11, 2005 2:03 pm
Location: USA
 

Postby spudman029 » Fri Jul 01, 2005 3:46 pm

Ya dont use that bangsite, just dont. Im glad that you get a loud noise, but that loud noise is there for a reason. To get similar results, on the muzzle end of the resivour, cut away so you have just enough pipe left to attatch a sch80 union. Little things called burst discs are inserted into the union, and when you fire, the gasses blow through the burst disc[usually foil], and it makes a loud bang. Here is a paint pic to show you what i mean.
EDIT-Make sure that you glue the union with proper pvc cement

EDIT-The only reason the fuel is safe in those BigBang Cannons, is that their cannons are made from cast iron, not pvc plastic.

<img src="http://www.spudfiles.com/uploader/uploadFiles/bigbang.JPG">
spudman029
 
Posts: 1025
Joined: Wed Dec 08, 2004 5:31 pm
Location: USA
 

Postby Mr.Plow » Fri Jul 01, 2005 3:55 pm

Great paint! That looks really smooth and well done.

Since there is no projectile, I think this cannon won't explode, even when using acetylene. There is so little gas made that I doubt it would blow. I've got a carbide cannon as well that I bought from a flea market, and considering it is made from stamped thin gauge metal and has never showed signs of failure, I wouldn't worry.

Still, since I'm such a fraidy-cat, I personally wouldn't be right next to it when firing. If it were mine, I'd have a BBQ ignitor with a long, long cord :evil:

I know I'm a wimp, but I'm a wimp with all his limbs intact:D
Mr.Plow
 
Posts: 3932
Joined: Fri Aug 29, 2003 11:48 pm
Location: USA
 

Postby saladtossser » Fri Jul 01, 2005 4:02 pm

Awesome paint job, i swore it was ABS until u said pvc, that fuel is clever. that is the greatest bi-pod i have ever seen, it is just so shiny and have a odd look to it but i like it
saladtossser
 
Posts: 1207
Joined: Sun May 29, 2005 5:00 pm
Location: Canada
 

Postby BillyBobJoe » Fri Jul 01, 2005 4:51 pm

VERY NICE! I love the clean construction - just like all of your other cannons.

Considering the plans were in Backyard Ballistics, they should be safe (and like Mr. Plow said - his is thin metal)
BillyBobJoe
 
Posts: 1401
Joined: Fri Mar 19, 2004 5:41 pm
Location: USA
 

Postby jimmy » Fri Jul 01, 2005 5:23 pm

Very nice. Really like the fueling system.

Folks are being pretty paranoid, without anything in the barrel the gun isn't going to generate much internal pressure.

When I was a kid we had a bangsite canon (the big one). The body is cast iron but the barrel was thin sheet metal help in place by a single pin. The pin could be removed so the barrel could be removed.
jimmy
 
Posts: 790
Joined: Wed Jul 30, 2003 11:02 am
Location: USA
 
 
Next

Return to Finished Cannons

cron