Just starting to spud and wonder how long your barrel should be? Want to know how to build a better cannon? This is just the place! If you think your question is one of a newcomer, please post it in here. If your question is posted elsewhere, and it's a newcomer's type question, it will be moved in here.

Postby MX_ » Tue Mar 06, 2007 12:58 am

Would I use McMaster part #90133A440 or #90133A435 for the sealing face on my 1 1/2" piston valve.

I ask mainly because I don't know if the one that's exactly 1 1/2" in diameter will be big enough where-as I could cut down on the 2" one.

P.S. <a href="http://xs513.xs.to/xs513/07102/roughsketch.png">Rough Sketch</a> of my cannon. Mainly the piston portion of it.
Posts: 45
Joined: Thu May 18, 2006 5:51 pm

Postby sgort87 » Tue Mar 06, 2007 1:03 am

You would want the bigger one. The inside diameter of 1.5" pipe is actually closer to 1.6".

I'd actually suggest getting a large sheet of neoprene and you can cut it exactly how you need and you'll have more for later. Take a look at #8568K2.
Posts: 2062
Joined: Thu Sep 08, 2005 11:59 pm
Location: USA

Postby hi. » Tue Mar 06, 2007 6:02 pm

Another thing that works very well is a inner tube from a bike. Thats what i used and it seals evey time.
Posts: 42
Joined: Sun Feb 25, 2007 10:42 pm
Location: USA

Return to Frequently Asked Questions aka The Newbie Corner