Page 1 of 1

PostPosted: Sun Feb 11, 2007 5:05 pm
by somedude
Hey, i need some help on witch method of ignition i should use if i want to ignite multiple (6) barells at the same time. i was thinking about using a static BBQ igniter then just splitting it and wiring it to all six barells.

Any thoughts?

PostPosted: Sun Feb 11, 2007 5:23 pm
by somedude
How long can the wires be with this ignition?

PostPosted: Sun Feb 11, 2007 6:10 pm
by Los Frijoles
Well, I already see one problem:

Using a static BBQ ignitor to make 6 sparks is not going to work. They can barely make one. My recomendation is to use a 100KV stungun.

Make the wires as short as possible.

PostPosted: Sun Feb 11, 2007 6:33 pm
by SpudBlaster15
A BBQ igniter can produce 6 small (~2mm) sparks. Whether such a spark is enough to actually ignite the fuel depends on what fuel you are using, aswell as the air/fuel ratio and mixing of the fuel.

PostPosted: Sun Feb 11, 2007 10:04 pm
by Madprofessor1775
Hook it to a automotive coil and a distributer. Make a crank to turn the distributer by hand. You'll chain fire it.

PostPosted: Mon Feb 12, 2007 12:51 pm
by Numbuh 16
<blockquote id="quote"><font size="1" face="tahoma,verdana,arial" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Madprofessor1775
[br]Hook it to a automotive coil and a distributer. Make a crank to turn the distributer by hand. You'll chain fire it.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

AWW YEAH.

Do it, it will be the most awesome thing you can do.

PostPosted: Wed Feb 14, 2007 10:10 pm
by somedude
problem is i dont know how to wire any of that.. i dont even know where to begin :?:

PostPosted: Wed Feb 14, 2007 10:13 pm
by somedude
The disributer will change the current of the electricity to each barrel.. and i think the coil will supply the spark but will it create a continous spark?

PostPosted: Thu Feb 15, 2007 12:22 am
by BewareOfDog
<img src="http://img.villagephotos.com/p/2003-9/398596/series.GIF">