High pressure system ( over 333 psi)

Post questions and info about pneumatic (compressed gas) powered launchers here. This includes discussion about valves, ratios, compressors, and anything else relevant to launchers powered by compressed gas.

Postby brian the brain » Sun Dec 10, 2006 3:26 pm

I fitted my trackpump with a QD female QD, and my sawed-off shotgun with a male QD with a schrader valve ( modded) inside of it.
This way I can "click" the ( all metal) gun onto the pump.
It works real pro!!
Only problem during testing was, a QD doesn't come off at over 300 psi!!
So I fitted a bleed valve: The Quick HP fillstation was born!

It takes about 20-25 pumps to get the gun up to 23 bar.Then bleed, and click, it;s ready to go!!

I will also attach my shock pump to the system to get it up to 25 bar.
For all you guys who don't know my sawed-off riot gun , I suggest you read the main page of the topic below.
Link with pics here: http://www.spudfiles.com/forums/viewtop ... &start=60&
brian the brain
Posts: 106
Joined: Thu Mar 23, 2006 5:31 am

Return to Pneumatic Launchers