Two satge round

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!

Could this Idea be practicle

Poll ended at Fri Oct 23, 2009 7:41 pm

yes
0
No votes
no
1
100%
Mabey
0
No votes
Undecided
0
No votes
 
Total votes: 1
queensland spudder
Private 2
Private 2
Posts: 35
Joined: Sat Aug 08, 2009 1:13 am

Sat Aug 22, 2009 7:41 pm

I keep coming up with crazy ideas eh,

look what iamb think is a two stage round, the first stage will be a round firing out of a cannon , the second stage will be a sparkler rocket firing continuing its flight .

The idea is that if i could time when the sparkler rocket would go off when the projectile is still traveling upwards

now this concept is very shakey ,
problem No.1 Timing. timing is going to very difficult in the rounds second stage firing, the round will need a fuse that will ignite the sparklers at the right moment so that the projectile will achieve higher height.

Problem No.2 Premature Ignition. Premature ignition is a concern cause i don't want the hair spray to ignite before im ready to fire cause of the sparkler fuse.

. Im going to solve the premature ignition problem by cutting out a foam spacer so that the gases can't get to the sparkler , or i can use a piece of textile.

the timing situation is going to be a tough one, i will guesss around 12 seconds for the fuse , that 12 seconds will allow me to insert the round down the tube, place the piece of textile at the back, spray, screw back lid on and then wait and fire.

another person will be timing so that i know when to fire , i will fire about when the fuse goes to 1 or zero cause it takes least a second or to two for the rocket to start up and burn.

Im only looking to achieve for distance/height out of my projectile , not any incendiary uses .
queensland spudder
Private 2
Private 2
Posts: 35
Joined: Sat Aug 08, 2009 1:13 am

Sat Aug 22, 2009 7:45 pm

The casing for the sparkler will be a silican tube, the sparkler rocket will be glue / secured into place and will act as a nose cone.

the tube wil also have a tube fin for stabillity and the sparkler rocket will add more stabillity cause since the sparkler is at the front ,the Cg will be far enough in front of the cp, i will swing test it before launch to roughly test wether is air worthy or not.
User avatar
deathbyDWV
Corporal
Corporal
Posts: 576
Joined: Sat May 16, 2009 4:02 pm
Location: Owasso, OK

Sat Aug 22, 2009 8:53 pm

Sounds like a pretty good idea. :) I think it would work but i wouldn't want to go through all that just to get a little extra distance. :? But depending on the size of your rocket and how good your timing is you could get some serious distance. :D :twisted: :D :twisted: :D Good luck.
Life's too short to mark off the items on your wish list...
User avatar
spudtyrrant
Corporal
Corporal
United States of America
Posts: 550
Joined: Fri Jan 02, 2009 6:10 pm

Sat Aug 22, 2009 8:56 pm

maybe you should read the rules before posting
rules wrote:Discussion of solid propellants, explosive devices or incendiary projectiles fired specifically from a spud cannon is prohibited, and may result in a permanent banning of your account.For the purpose of this forum, these definitions will be used:
1. Rocket propelled projectiles, pyrotechnic smoke bombs, or any other burning projectiles would qualify as an incendiary projectile.
User avatar
inonickname
First Sergeant 4
First Sergeant 4
Posts: 2606
Joined: Sun Dec 07, 2008 3:27 am

Sat Aug 22, 2009 9:40 pm

Bloody hell, breaking the rules with something so useless man? Sparkler rockets are rubbish..

The mass that the fuel adds (and takes away from the cannon) does not equal the energy released from the fuel.

I have used a large air cannon to air lift shells, but that's not for discussion here..
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
Locked