Possible 2.5" Ammo

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
User avatar
Lockednloaded
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1566
Joined: Thu Sep 03, 2009 9:38 pm
Location: Texas, USA
Been thanked: 6 times

Thu Mar 11, 2010 11:20 pm

The most common ammo for 2.5" barrels are usually tennis balls. Tennis ball are fun, easy to get, and cheap, but damage can sometimes be lacking :( .
I was thinking about making a tennis ball launcher myself over spring break, but i love destruction :twisted: , so i decided to find something that was mildly cheap, and that i already had a lot of. Lacrosse balls matched both of these. A lot of people here have probably never played lacrosse, so i will give you some characteristics: about the same size as tennis balls (don't have a larger enough caliper to measure) about 1.5 lbs, and made out of solid rubber. You can get them for $.85 dollars a piece, and even cheaper in bulk.
Here is a picture
Image
User avatar
deathbyDWV
Corporal
Corporal
Posts: 576
Joined: Sat May 16, 2009 4:02 pm
Location: Owasso, OK

Thu Mar 11, 2010 11:22 pm

So do you not know if they fit in 2.5 inch pipe? Does anyone know? If they do fit then I'll have to get some for a launcher I have...
Life's too short to mark off the items on your wish list...
User avatar
DR
Specialist
Specialist
Posts: 179
Joined: Fri Oct 08, 2004 8:16 pm

Fri Mar 12, 2010 3:36 am

deathbyDWV wrote:So do you not know if they fit in 2.5 inch pipe? Does anyone know? If they do fit then I'll have to get some for a launcher I have...
duh1... <a href="http://www.google.com/">Google</a> home page; Type in : "lacrosse ball diameter"

duh2... Pick the very first website that appears at the top of the page:
<a href="http://www.google.com/search?client=fir ... ">Lacrosse ball - Wikipedia, the free encyclopedia</a>

duh3... A lacrosse ball is the solid rubber ball that is used to play the sport of lacrosse. It is typically white, but is also produced in a wide range of colors. It is usually 7.75 to 8 inches (19.7–20.3 cm) in circumference (about 2.5 inches (6.4 cm) in diameter) and weighs 5 to 5.25 ounces (140–150 g).

Average diameter of 2-1/2" SCH40 PVC pipe is 2.445", found by looking up the <a href="http://www.spudfiles.com/pvc_pipe_info.php">pipe info</a> link, on this site.

A difference of .055", or 0.0275" - all the way around the ball... Tight fit!


Edit: DUH4 <----To ME! (Was so caught-up in my own sarcasm, that I totally forgot my original thought)

Lockedandloaded: Have you ever tried to inject a tennis ball, full of water?
Makes them pretty heavy! About 4 ounces of water, plus the 57 grams, for the tennis ball, itself... about 6 oz.

Heavier than the lacrosse ball?
User avatar
jmadden91
Specialist 2
Specialist 2
Posts: 246
Joined: Thu May 07, 2009 6:03 pm
Location: Queensland, Australia

Fri Mar 12, 2010 9:32 am

haha DR seems you will like this:

DUH!!
User avatar
chenslee
Specialist
Specialist
Posts: 147
Joined: Thu Jan 29, 2009 2:25 pm

Donating Members

Fri Mar 12, 2010 10:14 am

I thought about getting some of these for my cannon projects. The official diameter allows for variances, so you would have to find a manufacturer that made them a little under 2.5.
User avatar
Moonbogg
Staff Sergeant 3
Staff Sergeant 3
United States of America
Posts: 1733
Joined: Mon Oct 13, 2008 10:20 pm
Location: SoCal
Has thanked: 154 times
Been thanked: 100 times

Fri Mar 12, 2010 1:01 pm

jmadden91 wrote:haha DR seems you will like this:

DUH!!
LOOOOOOOOOOOL!!!!
User avatar
McCoytheGreater
Specialist
Specialist
Posts: 191
Joined: Tue Dec 15, 2009 1:10 am
Location: Mississippi State

Fri Mar 12, 2010 5:11 pm

I can honestly say, I've never seen lacrosse balls being used in a spudgun. I've played lacrosse before and been hit by the ball. it sucks, so I can only imagine what damage it would do out of a spudgun. Good luck with your build.

DR spoke of injecting a tennis ball with water. Why not inject it with some form of epoxy? That is...if cost isn't a big option. I can see how epoxy filled tennis balls would get expensive.
User avatar
DR
Specialist
Specialist
Posts: 179
Joined: Fri Oct 08, 2004 8:16 pm

Fri Mar 12, 2010 5:48 pm

McCoytheGreater wrote: ...DR spoke of injecting a tennis ball with water. Why not inject it with some form of epoxy? That is...if cost isn't a big option. I can see how epoxy filled tennis balls would get expensive.
Because if the epoxy hardened, the ball would not go down the pipe ¹. You could let the epoxy set up inside of a scrap piece of 2-1/2" pipe, but the oval shape of it (inside the ball) could make the ball more likely to travel
in an erratic path, once it left the barrel.

¹ A standard tennis ball is about 2.7 inches in diameter - <a href="http://en.wikipedia.org/wiki/Tennis_ball">Tennis ball - Wikipedia</a>
and the 2-1/2" pipe is only 2.445" I.D.
User avatar
McCoytheGreater
Specialist
Specialist
Posts: 191
Joined: Tue Dec 15, 2009 1:10 am
Location: Mississippi State

Fri Mar 12, 2010 5:57 pm

DR wrote: Because if the epoxy hardened, the ball would not go down the pipe ¹. You could let the epoxy set up inside of a scrap piece of 2-1/2" pipe, but the oval shape of it (inside the ball) could make the ball more likely to travel
in an erratic path, once it left the barrel.

¹ A standard tennis ball is about 2.7 inches in diameter - <a href="http://en.wikipedia.org/wiki/Tennis_ball">Tennis ball - Wikipedia</a>
and the 2-1/2" pipe is only 2.445" I.D.
Yeaaaaah. I didn't take that into consideration.


Small lead shot, maybe?
User avatar
Lockednloaded
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1566
Joined: Thu Sep 03, 2009 9:38 pm
Location: Texas, USA
Been thanked: 6 times

Fri Mar 12, 2010 11:44 pm

I can honestly say, I've never seen lacrosse balls being used in a spudgun. I've played lacrosse before and been hit by the ball. it sucks, so I can only imagine what damage it would do out of a spudgun. Good luck with your build
Yea, been there... I have a kid on my team who shoots 95mph, and yesterday i got nailed right in the leg, hurt like a bi@tch!
Average diameter of 2-1/2" SCH40 PVC pipe is 2.445", found by looking up the pipe info link, on this site.

A difference of .055", or 0.0275" - all the way around the ball... Tight fit!
Yea, but don't most people use sdr or some other variation?
So do you not know if they fit in 2.5 inch pipe? Does anyone know? If they do fit then I'll have to get some for a launcher I have...
I know from experience they can do quite some damage, with a mild shot i put one through a wood fence, i can only imagine what it could do at higher speeds :twisted:
User avatar
Marffy
Specialist 2
Specialist 2
Posts: 258
Joined: Mon Jul 27, 2009 2:03 pm
Location: earth

Sat Mar 13, 2010 12:57 am

i like lacrosse. if they fit in the barrel they would be a cool alternative ammo.
"Hard work has a future pay-off. Laziness pays off now."
User avatar
starman
Sergeant Major
Sergeant Major
United States of America
Posts: 3027
Joined: Wed Dec 12, 2007 12:45 am
Location: Simpsonville, SC

Donating Members

Sat Mar 13, 2010 2:59 am

Lacrosse balls are a hit and miss thing, mostly depending on the make, as to whether they will fit in 2.5" sched 40. Most of them are ever so slightly too large. And unlike tennis balls which can be forced into a 2.5" barrel, a lacrosse ball will NOT give any...precise or slightly small fits are a must.

Cut a small length of 2.5" pipe (couple of inches will do) and take it with you to your local sporting goods dealer and try fitting balls in it before you buy them.
User avatar
Lockednloaded
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1566
Joined: Thu Sep 03, 2009 9:38 pm
Location: Texas, USA
Been thanked: 6 times

Sat Jan 29, 2011 5:36 pm

I got my hands on a tennis ball barrel from launchpotatoes.com and I've found that old lacrosse balls work very well. The reason old lacrosse balls work so well is due to the fact that the more you use them, the smoother they get. This is great because old lacrosse balls that have become smooth are pretty much worthless to any lacrosse player
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Sun Jan 30, 2011 10:26 am

In testing with my large cannon, water filled tennis balls go almost twice as far as normal tennis balls.
Post Reply