1/4in outer diameter tubing

[skishoot]

what pressure will vinyl 1/4in od tubing hold i/ve had it at 125 with no problem but it doesn't have a pressure rating on it does anybody have any idea on what it can take?

[c11man]

that can vary greatly. it all depends on the material and the wall thickness.

[skishoot]

I'd say the wall thickness is at least a mm, just used it at 60 psi and it work fine and have used it at 125 as I have said before.

[c11man]

it should be good to about 250. on the box that the coils come it it typicly gives the pressure rating if you can go find it

[skishoot]

I got it at homedepot and it didn't say anything it came coiled up and attached with a cardboard thing, i even checked in the store and it didn't say anything except "not for use with icemaker" on the tube.

[c11man]

if it doesnt say the exact pressure of the hose then i couldnt give you a more specific answer.

i use some 1/4inch od tubing for my ac compressor. but that is much more than 1mm thick and its nylon not vinyl

[skishoot]

thanks for the info I will use it up to 125 because that is all I can get up too, but thanks for the info, I just didn't want it to blow in my face

[skishoot]

thanks for the info I will use it up to 125 because that is all I can get up too, but thanks for the info, I just didn't want it to blow in my face.

[c11man]

yeah it definetly will be fine up to 125psi