Hello, I was wondering what 2.5" pipe sleeves into. Judging by some pictures, it looks like 3" SCH80 but I would like to make sure before I go and buy a 10' length of it.
Also, do SDR and SCH classes of pipe share the same outer diameter?
Sleeving 2.5" Pipe?
-
SEAKING9006
- Corporal 3
- Posts: 734
- Joined: Mon Jun 23, 2008 3:20 pm
- Location: Texas
0_o
Where are you getting 2.5in pipe and 3" Sch80?
Where are you getting 2.5in pipe and 3" Sch80?
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
-
ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
it appears he is right! 2 1/2" SDR 21 has roughly the same OD and the ID of 3" SCH 80
<a href="http://www.bungie.net/stats/halo3/defau ... player=ALI H IS GREAT"><img src="http://www.bungie.net/card/halo3/ALI H IS GREAT.ashx"></a>
DYI - Thanks, that helps a bunch.
My local plastic pipe distributor sells SCH 40 and 80 in all sizes from 1/2" to 12" (and beyond that for special orders) and most common fittings in both gray and white (even some sizes in clear I think). They are they only supplier of NSF-PW in town and they sell pipe in 10' sections only. No SDR sizes though, I have to make a road trip to Michigan for that.
My local plastic pipe distributor sells SCH 40 and 80 in all sizes from 1/2" to 12" (and beyond that for special orders) and most common fittings in both gray and white (even some sizes in clear I think). They are they only supplier of NSF-PW in town and they sell pipe in 10' sections only. No SDR sizes though, I have to make a road trip to Michigan for that.