SpudFiles

I'm having a little bit of trouble finding the most efficient way to do this. I can't seem to find a reducer adapter that goes from 2" socket to 1" male threading.

Well that is because they don't exist. I am assuming you are using the 2" pipe for your chamber, so you need to make sure to use NSF-PW fittings, which means you will need 3 or so fittings to do that.

Heres the order:
2" Female socket coupler
2"-1" bushing
1" pipe
1" Female socket to 1" male threaded coupler

There may be 1" male socket x 1" male threaded couplers, but I haven't run across them yet in NSF-PW PVC.

If you don't get this, ask for clarification.

How I did this was by purchasing a PVC pipe nipple, a 1" thread x 2" slip bushing, and a 2" coupling

a 1" PVC nipple
a 1" thread x 2" slip bushing
a 2" coupling

Glue the bushing into the coupling, then screw the nipple in the valve and the bushing. That simple.

If you cant find a 2->1 then try:
2->1,5 + 1,5-> 1
Or something like that.