SpudFiles

an aerodynamic ice slug

Just open the egg, sumberge it in liquid, put on the fastner, then stick it in the freezer.

for 1.5 pvc barrels

I fired off an ice slug and when they fit just right they go flying WAY FARTHER than potatoes! I would suggest easter egg ice slugs to anyone who is looking for serious speed, distance, and accuracy

Another good one is car bodyfiller slugs,made the same way as ice slugs and surpirzingly the hardend filler does pop out of the moulds with minimal force.and they are alot harder then ice

Parafin Wax + PAM

if you put lemonade in the ice you could eat is:P maybe if you have balls some1 will shoot and you catch it woth your mouth and eat it:D love the idee

if you got a syringe and took the paint out of a paintball then filled it with water and after you have frozen it peel the skin off and you will have an ice ball

I'm glad someone picked up on the body filler idea, i posted that one a while back. The ice ammo caught on even faster. I wonder who thought of that before me? Someone here said "great minds think alike", GOOD THINKING!!!

i found that using easter eggs as a mold for ammo is way better than the cylinder mold.

use the regular sized eggs. not the big ones and not the more narrow ones.

what size barrel do they fit in 1 1/4"?

Andrew52 wrote:what size barrel do they fit in 1 1/4"?

They work well with 1 1/2 but you could melt them a little to fit that size. They are ICE slugs!!!

I'm going to be making them for a 2 1/2 " barrel, any sagestions on what to use as a mold? Cut off soda can, or just leave the can on maby??
What ever fits a 3" piece of sch 40 pvc.

Well you could make a cylinder mold from pipe the same size as ur barrel like the one i had posted, but that can leak if you don't have the bottom of the mold completely sealed.

Did you buy you 2 1/2 at spudtech or a store? if at a store what chain?

Maybe frozen playdoh would work too

Mcmaster Carr has these metal balls, in any size from 1/8" to i think 4" but for a pack of 25 1" its like $15, and if you take concrete and make a mold smaller then in your barell and put some rebar size #4 in there and let it dry and then take it out and get the same size as you barel center it up and put some water around it and let it frezze it works super well

Josh

my sister is a retarded monkey,she put a can of coke in the FREEZER.... for reasons that escape me.well some time in the night it burst (liquid expanding..bla bla) and the whole inside of the freezer was covered in coke crystals damn it was a huge mess.

let this be a lesson and no-body be as dumb as this!

The pvc i have is 3", i was guessing the inside diameter to be 2 1/2" due to wall thickness. Maby it's more like 2 3/4 inside diameter. Don't quote me on them sizes, i could be wrong!

Jrrdw, harvel.com lists the ID of 3" sch 40 PVC pipe as 3.042".

As to the ammo presented here, it looks to be a good idea - being roundish, you'll get less lift in undesirable directions when it tumbles.