Page 1 of 1

circuit question

Posted: Tue Feb 14, 2012 3:09 pm
by jor2daje
Hey guys got a quick question that is out of my electrical league so Im asking here. I recently got an old camera which parts are no longer available for and they only come up very rarely on ebay. My problem I do not have the correct power cord, I have the battery and the camera but no cord. The issue is that the battery is a 2 pin lemo connector and the camera has a 7 pin lemo connector. Im not really sure why it needs a 7pin connector for just power, it has other ports for different control and video out and the like, if you know why let me know im interested. Anyway so Im trying to figure out how to make the cord my self heres a picture of the back of the circuit board the connector is on if that helps, it appears the center pin is possibly the ground? Oh and the camera is an agema thermocam 450 incase anyone has any experience or better luck finding a circuit diagram. I got it for next to nothing and figured Id have a go at getting it to work before I sell it on for parts.


Posted: Tue Feb 14, 2012 6:22 pm
by jrrdw ... m270.l1313 A ebay search, the 1st listing of the battery has a cord on it. Is yours like that. Did you Google it?

Posted: Tue Feb 14, 2012 6:29 pm
by jor2daje
I have the battery it is two pined a connector is necessary to go between the battery and camera.

Posted: Tue Feb 14, 2012 7:41 pm
by dewey-1
Here is a link to view; ... ter=images

Can you take a picture from component side?
Get the manual:

pin 1 is: + 11 to 14 VDC
pin 7 is: - (ground)