Page 2 of 2

Posted: Thu Sep 05, 2013 9:07 pm
by Gun Freak
@LnL I made another horn tonight so now I have a 3-trumpet horn on my car. Anyways, took some pics of the insides before and after the drilling process which I will upload for you tomorrow. You can clearly see how I used the shape of the bushing combo to my advantage...

Wait till you guys hear how this triple horn setup sounds :D

Posted: Sat Sep 14, 2013 8:21 am
by Gun Freak
So here you can see where I drilled the hole, I only took a picture before I drilled the air input hole but you get the idea.

In this picture, the hole would be in between the lip on the inside of the bushing and to the right of the right-most glue ring.
Image

Here you can see how I filed off the pipe stop so the pipe can extend in the horn body, like when you make a piston valve. Right behind the lip is where the air hole is.
Image