What do I do?
- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
Ok, I just found an old weed-wacker, and I copletely stripped it to the motor, I fixed it so now it works. What should I do with it? I want to make something cool, Possibly a motorized scooter, or bike. Can Someone help me out with plans?
-
- Specialist
- Posts: 117
- Joined: Sat Jan 27, 2007 3:07 pm
Dude me too ive got like 4 weed whavker motors and nothing to do with them i think a bike would be a little too hard because thats a lot of weight to get moving. I was originally going to try to make my own 1:5 scale RC Monster Truck but from what i learned its pretty hard and expencive so iether go with an RC Car like i tried ( which failed misserably because of not enough funding) or a scooter which would be pretty easy!
Try this site it looks pretty neat! http://buggies.builtforfun.co.uk/Scooter1/index.html
Try this site it looks pretty neat! http://buggies.builtforfun.co.uk/Scooter1/index.html
i made a trolling motor out of my gas weeder but it didnt have enough power to push my john boat 

- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
Yes! And have carbon monoxide and other toxic fumes blowing on you face! Delicious!
Summer Projects:
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
CO2 tank hybrid: Gotta fix the meter

Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
Actually, making an RC car shouldn't be that expensive... You just need some angle aluminum, some polycarbonate for suspension/arms, some bike chain for the drive, a couple bike gears, an ESC an rc reciever, pvc caps for wheels with some tacks through them for traction, a steering system (you can buy kits), a drill, some bolts, some steel rod, and a radio controller. (You can buy a radio controller and reciever on ebay for 20 bucks) Two servos, one for steering, one for throttle, and that will all only cost you about 100bucks.
EDIT: However, it would be much easier to just build an RC boat. All you need is throttle and rudder, and the drive thing from the old weedwacker to attach you propeller to.
EDIT: However, it would be much easier to just build an RC boat. All you need is throttle and rudder, and the drive thing from the old weedwacker to attach you propeller to.
- PCGUY
- Owner
- Posts: 1436
- Joined: Wed Aug 18, 2004 10:54 pm
- Location: Illinois
- Has thanked: 2 times
- Been thanked: 26 times
- Contact:
It won't have enough power to move anything your weight is on (aside from maybe a small moped, if the engine is strong enough and your light and lucky). I through I could make some sort of motorized bike but as soon as I put load on the engine (old weed whacker engine, probably very similar to yours) it would get very unhappy.
Engines like that are made for revving with minimal load on them. Stick it on a bike and it will rev all day trying to move your ass, and will probably burn up/run out of gas before you make it anywhere.
Engines like that are made for revving with minimal load on them. Stick it on a bike and it will rev all day trying to move your ass, and will probably burn up/run out of gas before you make it anywhere.
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).