advantages of sprinkler valve over a blow gun?
-
- Private
- Posts: 5
- Joined: Mon Feb 11, 2008 4:00 pm
ok i just realized..now i feal dumb...
i was gonna just use a blowgun on a gun im going to make because it looks better.... but i it wouldn't really work now that i thought about it...i was just mainly focusing on the other aspects of my plan.
sorry if i annoyed anyone but im kinda new to this stuff.
i was gonna just use a blowgun on a gun im going to make because it looks better.... but i it wouldn't really work now that i thought about it...i was just mainly focusing on the other aspects of my plan.
sorry if i annoyed anyone but im kinda new to this stuff.
A sprinkler valve moves much more air than a blow gun can... A blowgun vents about 10 cubic feet of air per minute (CFM or SCFM) on average... The better ones (high pressure\flow) venting about 32 SCFM at 100 psi... Whereas a 3/4" QEV (similar to a 1" sprinkler valve in flow) vents around 480 SCFM at 100 psi...
That means about 48 times move flow from a 1" sprinkler valve \ 3/4" QEV than a blowgun.
A homemade piston valve can normally vent much more air than a sprinkler valve...
Even a ball valve is a much better choice than a blowgun... A 1/8" ball valve probably vents more than a standard hardware store blowgun (normally about 10 SCFM@100psi)... A 1/4" ball valve vents much more than a hardware store blowgun.
That means about 48 times move flow from a 1" sprinkler valve \ 3/4" QEV than a blowgun.
A homemade piston valve can normally vent much more air than a sprinkler valve...
Even a ball valve is a much better choice than a blowgun... A 1/8" ball valve probably vents more than a standard hardware store blowgun (normally about 10 SCFM@100psi)... A 1/4" ball valve vents much more than a hardware store blowgun.
-FrOgY-
I wish people would stop needing a better signature!
I wish people would stop needing a better signature!
- jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
markieclarkie wrote:When ya got no girlfriend (or boyfriend) every Sunday is palm Sunday
In Italian they refer to "Federica, la mano amica" (Federica, the friendly hand) hehe
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Staff Sergeant 2
- Posts: 1603
- Joined: Sat Aug 11, 2007 6:59 pm
- Been thanked: 1 time
Well i have Mrs Palmer and her five daughtersjackssmirkingrevenge wrote:markieclarkie wrote:When ya got no girlfriend (or boyfriend) every Sunday is palm Sunday
In Italian they refer to "Federica, la mano amica" (Federica, the friendly hand) hehe
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
-
- Specialist 3
- Posts: 371
- Joined: Sat Jan 12, 2008 7:30 pm
LDSboltaction wrote:ok i just realized..now i feal dumb...
i was gonna just use a blowgun on a gun im going to make because it looks better.... but i it wouldn't really work now that i thought about it...i was just mainly focusing on the other aspects of my plan.
sorry if i annoyed anyone but im kinda new to this stuff.
No problemmmm...
Search works pretty well...
Or go to the how to section.
Modified Blowguns are quite nice if you're looking for a semi auto.
Sprinkler Valves can also go semi auto, but you need time for it to reach equilibrium.
And yes stock valves work but the cannon I made had a stock valve .. the g-ball only went 50-75 ft.......I modded the valve with a modded blowgun and now it goes 300-400 yds.
Ya so I guess that the modded sprink is 10x more than the stock.....
And we ALL were new once!!!
Ya so I guess that the modded sprink is 10x more than the stock.....
And we ALL were new once!!!
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
I don't think that's possible, for a 1" modded sprinkler valve, using pressures under 140psi to shoot a golfball that far. Well not practical anyway and in my experience you would've only shot about 220yards max.jr wrote:And yes stock valves work but the cannon I made had a stock valve .. the g-ball only went 50-75 ft.......I modded the valve with a modded blowgun and now it goes 300-400 yds.
Ya so I guess that the modded sprink is 10x more than the stock.....
And we ALL were new once!!!
well it went a long ways but only half as far as my big cannon..... there are to many trees up here in the PNW to know for sure.......and I don't have the ggdt to know what the approximates might be..
picking one fur tree from another is like trying to find the fish you just put back in the lake. LOL Once it goes over the first row you cant see it any more...
when i get my scuba reg. fixed i am going to talk with the driving range and see if they will let me shoot there...
when i get my scuba reg. fixed i am going to talk with the driving range and see if they will let me shoot there...
- POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
I rarely can find anything that i shot further than 100 m.... how are you doing it really?? I suppsoe that bolts get burried underground when they hit the ground at 50 deg angle....
- POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
@carlman LEDs also work well for this purpose but i am just curious how is it possible that people can verify their shots, for example above 500 m, if I have problems with verifying shots above 150m ?
- Carlman
- Staff Sergeant 2
- Posts: 1618
- Joined: Sat Nov 24, 2007 1:18 am
- Location: Western Australia
- Been thanked: 2 times
for my distance shots i have a property which is 600m on its longest side with a 10m wide fire break. my fence posts are 2 m apart so it it made for measuring distance
just shoot down it and go find that glowing spud whilst counting the posts as you go
just shoot down it and go find that glowing spud whilst counting the posts as you go
Aussie spudders unite!!
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
I have a golfcourse as my back yard really, I fire off a couple of shots, walk down and spend 20minutes finding my marked golfball.POLAND_SPUD wrote:I rarely can find anything that i shot further than 100 m.... how are you doing it really?? I suppsoe that bolts get burried underground when they hit the ground at 50 deg angle....
I then refer to an ugly looking tree or a huge one, or maybe a sand bunker, and go on google earth and use the ruler.