Hey there, recently built my first pneumatic with a sprinkler valve which is awesome. Now I am making a 2" piston valve gun. I was able to create the piston already from plywood discs and some rubber. However, now I have to create the gun. Here is my design:
<a href="" title="piston valve design thing by electrictape22, on Flickr"><img src="http://farm3.static.flickr.com/2488/420 ... 15a5_o.jpg" width="640" height="400" alt="piston valve design thing"></a>
I have three questions though...
Will it work? If so how could the design be better? Finally, how would I make the 1" barrel go into the 2"? I think the answer for the third one is with a coupler and file down the inside, but I'm not sure.
(and yes, the picture is terrible.)
Piston Valve Design
-
Cosmic Muffin
- Specialist 2
- Posts: 275
- Joined: Mon Jan 14, 2008 10:30 pm
- Location: arse end of nowhere
no it will not work.. look at some other designs on the forums.
and you'll be sittin pretty
and you'll be sittin pretty
-
electrictape22
- Private
- Posts: 9
- Joined: Sat Dec 19, 2009 5:48 pm
What about something like this?
<a href="" title="pistonthing by electrictape22, on Flickr"><img src="http://farm3.static.flickr.com/2736/419 ... 3f19_o.jpg" width="640" height="400" alt="pistonthing"></a>
Still, how do I put in the 1" barrel?
<a href="" title="pistonthing by electrictape22, on Flickr"><img src="http://farm3.static.flickr.com/2736/419 ... 3f19_o.jpg" width="640" height="400" alt="pistonthing"></a>
Still, how do I put in the 1" barrel?
http://www.spudfiles.com/forums/piston- ... t8157.html
Come on, search! Among one of the most discussed issues, this site has more than enough information through the
search function.
Come on, search! Among one of the most discussed issues, this site has more than enough information through the
search function.