I have built two Pneumatic cannons and i love them. The only problem i have with them is the fact that i have to keep the air compressor going and having to keep filling it back up. Is there anyway to use air or C02 out of a paint ball gun to keep shooting without having to refill all the time.... If there is a way would someone help me out. I have tried searching and i evidently cant use the search correctly because it never looks up what i put in the search bar..
Thanks in advance
CJ
Pneumatic repeater....
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
What sort of a valve are you using?
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Ninty2lxcoupe
- Private
- Posts: 4
- Joined: Tue Sep 04, 2007 11:30 pm
Well I thought of using a sprinkler valve. But I do not know if the valve will close after it shoots. I have had problems with those valves not wanting to close until all the air is out of the chamber. I was wanting to use a Paintball cylinder.. I guess i could use a separate chamber connected to the Paintball cylinder with a shutoff valve in the line..
-
clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Given enough flow, a sprinkler valve should reseal once the pilot is closed. You can also assist matters by including a spring to help the diaphragm shut.
You'll definitely need a regulator to keep things at 150 psi or so if you're using a sprinkler valve though.
You'll definitely need a regulator to keep things at 150 psi or so if you're using a sprinkler valve though.
hectmarr wrote:You have to make many weapons, because this field is long and short life
i use a co2 tank>remote line (tank is back mounted for airsoft)>regulator> paintball thread to NTP adaptor>quick connect> chamber. i get alot of shots, and my field also has paintball, so i get all day co2 for $10. itts also the most portable system (or swap the tank for an HPA one) unfortunetly, the setup is worth around $300, so its a little pricey
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
If you want a cheaper setup you can use propane to fill your tank, but I don't know if it would have a negative effect on your diaphragm if you do end up using a sprinkler valve.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
have a regulated co2 tank connected with a bal valve to your main chamber so for every shot just open the ball valve until the pressure equalizes then close it ant aside from loading your good to go
AHahahahah!!mikemurph wrote:yea, the ammo has been changed to a more aero dynamic projectile. it consists of the back half of a dart, and a hot glue ball
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
As for loading, make a breech loader (bolt action, coupler cover) or a simple tee mag.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!