Blowgun-Triggered Piston Valve
I'm coming up with the basic concept of my next build, a more or less rifle-shaped golf ball gun, and I'm curious if with an efficient enough pilot area I can trigger the piston using just a blowgun and cutting out the unnecessary (in my opinion) cost of a sprinkler valve? Is it possible and I so how tough would it be? Oh and it's a 2" piston valve (contained in 2" tee)
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
It depends how you're making your piston. Close tolerance (epoxy casting, machined, fitted with o-rings) is essential.
2" diameter piston piloted by a schrader, with the benefit of an o-ring seal.
Best thing is to do the math, if you know the flow area of your blowgun and the inner diameter of your tee, you know how loose the piston can afford to be before it doesn't pilot.
2" diameter piston piloted by a schrader, with the benefit of an o-ring seal.
Best thing is to do the math, if you know the flow area of your blowgun and the inner diameter of your tee, you know how loose the piston can afford to be before it doesn't pilot.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Gaderelguitarist
- Corporal
- Posts: 580
- Joined: Sat Aug 16, 2008 9:56 pm
- Location: Columbia, MD
- Contact:
Some people on here have made pistons sensitive enough to be piloted by a shraeder valve. Blowguns are very doable. It helps if you have a lathe or drill press to make your piston.
I would suggest using a couple o-rings and a built in check valve in your piston.
Edit: JSR beat me to it by a measly second.
I would suggest using a couple o-rings and a built in check valve in your piston.
Edit: JSR beat me to it by a measly second.
Last edited by Gaderelguitarist on Thu Jun 30, 2011 11:57 pm, edited 1 time in total.
so many muchness
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
... but epoxy casting will give you just as close a fitGaderelguitarist wrote:It helps if you have a lathe or drill press to make your piston.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Gaderelguitarist
- Corporal
- Posts: 580
- Joined: Sat Aug 16, 2008 9:56 pm
- Location: Columbia, MD
- Contact:
Epoxy casting would definitely be easier than machining a block of material to such a tolerance.
Jack, love your lathe as it loves you.
Jack, love your lathe as it loves you.
so many muchness
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
I don't want to forget my volkskartoffelkanone roots either and sound all high an mighty, machining tools are amazing but not essential to make a good quality high performance launcherGaderelguitarist wrote:Jack, love your lathe as it loves you.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Gippeto
- First Sergeant 3
- Posts: 2503
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
Sounds something like this one...
Entirely do-able. (click on the picture)
The link
http://www.spudfiles.com/forums/my-firs ... 12796.html
Entirely do-able. (click on the picture)
The link
http://www.spudfiles.com/forums/my-firs ... 12796.html
"It could be that the purpose of your life is to serve as a warning to others" – unknown
Liberalism is a mental disorder, reality is it's cure.
Liberalism is a mental disorder, reality is it's cure.
Gippeto the design you linked is almost exactly what I'm doing... Which is weird. Anyways, I do have a lathe, on my older piston gun I bought two flat endcaps and turned them down, problem is that the ID of one of the pipes in my tee housing was actually bigger than the other, so it fit pretty loose at the bottom. But that epoxy idea is really good too, definitely going to make a hybrid PVC end caps and epoxy, thanks.