Barrel to chamber ratio
-
AirGunNooblet
- Private
- Posts: 5
- Joined: Wed Feb 01, 2012 10:04 am
Is there a certain barrel to chamber ratio which would give you maximum efficiency with the air?
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
Yes.
However it depends on:
- how fast your valve is
- how much flow your valve is capable of
- what pressure you're using
- how heavy your projectile is
So the one-word answer is GGDT
However it depends on:
- how fast your valve is
- how much flow your valve is capable of
- what pressure you're using
- how heavy your projectile is
So the one-word answer is GGDT
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
Most of us do not try for maximum efficiency on air cannons. Maximum efficiency and maximum power are not really close together on the performance curve.
Maximum efficiency is where the pressure accelerating the projectile has fallen to zero as it reaches the muzzle. A really small chamber or low pressure is required for maximum efficiency.
A little more pressure in the chamber can provide a much higher acceleration on the projectile and provide significant acceleration all the way to the muzzle resulting in a much higher projectile velocity. A higher pressure and/or larger chamber requires much more stored energy which is lost after the projectile is ejected, so this is not at maximum efficiency.
I dealt with this quite a bit when designing a competition t shirt launcher as it was originally pumped up by hand.
We collected considerable in barrel acceleration data on that launcher.
I have found that the choice of the valve has a huge impact on efficiency and power. For an air cannon, a valve that provides minimal drag on the air flow is a huge factor.
Maximum efficiency is where the pressure accelerating the projectile has fallen to zero as it reaches the muzzle. A really small chamber or low pressure is required for maximum efficiency.
A little more pressure in the chamber can provide a much higher acceleration on the projectile and provide significant acceleration all the way to the muzzle resulting in a much higher projectile velocity. A higher pressure and/or larger chamber requires much more stored energy which is lost after the projectile is ejected, so this is not at maximum efficiency.
I dealt with this quite a bit when designing a competition t shirt launcher as it was originally pumped up by hand.
We collected considerable in barrel acceleration data on that launcher.
I have found that the choice of the valve has a huge impact on efficiency and power. For an air cannon, a valve that provides minimal drag on the air flow is a huge factor.