pneumatic electric potatoe cannon help
Do you know exactly where the leak is?
If you don't:
Put it in a bathtub full of water when pressurized, bubbles will come from the hole.
Then seal it with epoxy or sealant.
If you do:
Seal it with epoxy or sealant.
If you don't:
Put it in a bathtub full of water when pressurized, bubbles will come from the hole.
Then seal it with epoxy or sealant.
If you do:
Seal it with epoxy or sealant.
-
saladtossser
- Sergeant 3
- Posts: 1234
- Joined: Sat Mar 26, 2005 10:40 am
- Location: Toronto
- Contact:
did u use teflon tape first? dont jump to glue without trying teflon tape
"whoa... I thought pimpmann was black..."-pyromanic13
-
mark.f
- Sergeant Major 4
- Posts: 3638
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 58 times
- Been thanked: 61 times
- Contact:
saladtosser...
<img src="http://i10.photobucket.com/albums/a123/ ... 1q/wtf.png">
What the hell is that?!?!? Where I come from, we don't roll that way.
<img src="http://i10.photobucket.com/albums/a123/ ... 1q/wtf.png">
What the hell is that?!?!? Where I come from, we don't roll that way.
-
BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
Way to stay on topic guys.
Is the valve on the right way? (Look for arrows molded into the body, they should point toward the barrel)
Is the valve on the right way? (Look for arrows molded into the body, they should point toward the barrel)
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
